Brother MFC-5490CN LAN Driver

The Brother MFC-5490CN LAN driver helps Windows communicate with your Brother multifunction printer over a wired network, enabling compatible printing and scanning functions. It is useful when setting up the device on a new computer, restoring a missing network printer, or troubleshooting communication problems.

Key Features

• Wired network connectivity: Connects compatible Windows computers to the MFC-5490CN through its Ethernet connection so users on the same network can access supported functions.
• Printing controls: Provides access to settings such as paper size, media type, and print quality, depending on the selected driver package.
• Network scanning support: Compatible scanner drivers and utilities can enable document scanning over the LAN; a print-only package may not include these components.
• Legacy Windows support: Driver options are available for Windows 10, 8.1, 7, Vista, and XP. Choose a package that matches your operating system and architecture rather than assuming one installer supports every version.

How to Install Brother MFC-5490CN LAN Driver

1. Check your Windows version. Confirm your Windows edition and whether it uses a 32-bit or 64-bit architecture. For Windows 10/11 systems, check compatibility carefully: Windows 10 is listed here, but Windows 11 support is not confirmed.
2. Choose the appropriate package. Before starting your Brother MFC-5490CN LAN driver download for Windows, review the supported operating systems and included components. Use a trusted Brother source for a free download, and select the latest version offered for your specific system.
3. Prepare the network connection. Turn on the MFC-5490CN, connect it to your router or network switch with an Ethernet cable, and ensure your computer can reach the same network.
4. Run the installer. Open the downloaded package, approve any required administrator prompts, and select a wired network connection if asked. Follow the instructions to locate the device and install the required components.
5. Test the setup. Print a test page and, if you installed scanning components, try a scan. If detection fails, check the cable, device IP address, and network settings.

Keep the driver updated when a compatible update addresses a problem or improves reliability. Review compatibility notes before replacing a working installation, especially on older Windows systems, and avoid forcing an unsupported package onto a newer operating system.

Common Issues and Fixes

• Installer fails or hangs: Run the Brother MFC-5490CN LAN setup as administrator, remove any partial install first, and temporarily disable antivirus/firewall prompts. Use the full Brother package rather than a Windows generic driver.
• Device not detected on the network: Print the MFC-5490CN network configuration page, confirm the PC and printer are on the same subnet, and ping the printer’s IP. Create a Standard TCP/IP port using RAW port 9100 if auto-discovery fails.
• Driver/version conflicts or scanning errors: Uninstall old Brother MFC-5490CN and generic WSD drivers, restart Windows, then reinstall the latest compatible Brother package. Re-select the LAN-connected device for both printing and scanning.