Brother MFC-5460CN USB Remote Setup Port (COM3) Driver

The Brother MFC-5460CN USB Remote Setup Port (COM3) driver helps Windows recognize the USB communication interface used by Brother’s Remote Setup software to access settings on the MFC-5460CN multifunction printer. It is intended for users setting up a USB connection, reinstalling Brother software, or troubleshooting an unrecognized remote setup port.

Key Features

• Remote setup communication: Supports the connection between the device’s USB remote setup interface and compatible Brother configuration software.
• Windows device recognition: Helps Windows identify the remote setup port correctly instead of leaving it listed as an unknown device.
• Legacy Windows support: Look for a package matching Windows 10, 8.1, 7, Vista, or XP, including the correct 32-bit or 64-bit edition where available.
• Dedicated interface support: Addresses the remote setup connection; printing and scanning may require additional Brother drivers. Although some download listings classify this interface under Camera, the MFC-5460CN is a multifunction printer.

How to Install Brother MFC-5460CN USB Remote Setup Port (COM3) Driver

1. Check your Windows edition and architecture. Open your system information to confirm the operating system and whether it is 32-bit or 64-bit. For Windows 10/11 systems, verify compatibility carefully: Windows 11 is not included in the supplied support list.

1. Select the appropriate package. Before starting your Brother MFC-5460CN USB Remote Setup Port (COM3) driver download for Windows, confirm that the package explicitly covers your model and operating system. Choose a free download from an official Brother support source when available.

1. Prepare the USB connection. Turn on the printer and follow the installer’s instructions about when to connect its USB cable. Avoid connecting through a hub if you are troubleshooting detection problems.

1. Install the software. Extract the downloaded files if necessary, run the installer, and follow the prompts. If the package contains only driver files, use Device Manager’s Update driver option and browse to the extracted folder.

1. Confirm recognition. Restart Windows if requested, then check Device Manager for warning icons and test the connection using compatible Brother Remote Setup software. The assigned COM port number may differ from COM3 on your computer.

Keep the driver updated when Brother offers a compatible release that addresses your issue. Check for the latest version supported by your operating system before you update, and avoid replacing a working driver with a package intended for a different model or Windows edition.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, run the Brother MFC-5460CN installer as administrator, and temporarily disable antivirus. Remove any older Brother package with Brother’s uninstall tool, reboot, then reconnect USB only when prompted.
• Device not detected / COM3 missing: Use a known-good USB 2.0 cable directly to the PC—no hub. In Device Manager, check for yellow marks under Ports/USB, uninstall hidden “USB Remote Setup Port” entries, rescan, and reinstall the full Brother driver.
• COM3 conflict or version mismatch: If another device uses COM3 or the driver version is wrong, open Device Manager > Ports > USB Remote Setup Port > Properties and assign an unused COM port. Reinstall the latest MFC-5460CN package; avoid mixing Windows in-box and Brother drivers.