The Brother DCP T310 driver lets your Windows computer communicate with this ink tank all-in-one printer, helping it send print jobs correctly and access supported device settings. Installing the appropriate Brother software can also enable scanning functions, making it easier to handle documents and photos from your PC.

Key Features

• Reliable printing support: Provides the connection between Windows applications and the Brother DCP T310 so you can print documents, images, and everyday paperwork.
• Adjustable print settings: Gives you access to options such as paper size, media type, print quality, and color or grayscale output, depending on the driver package.
• Scanning functionality: A package that includes the scanner driver allows compatible scanning software to receive images and documents from the flatbed scanner.
• Windows-specific compatibility: Choosing the package listed for Windows 11, 10, 8, or 7 helps ensure the driver matches your system. Check whether your Windows installation is 32-bit or 64-bit where applicable.

How to Install

1. Check your Windows version. Open your computer’s system information and confirm the operating system and system type. Select a Brother DCP T310 driver package explicitly listed as compatible with that configuration.

1. Download the software you need. Choose a printer driver for printing, or a full driver and software package if available and you also need scanning support. Save the installer somewhere easy to find.

1. Prepare the printer. Make sure the device is set up, powered on, and free of visible errors. For a USB installation, leave the cable disconnected from the computer until the installer asks you to connect it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if requested, and follow the setup instructions. Connect the USB cable when prompted and allow installation to finish.

1. Verify the setup. Restart Windows if requested, then print a test page from the printer’s settings. If you installed scanner support, try a scan in a compatible application to confirm that both functions work.

If the printer is not detected, check the USB connection, try another USB port, and confirm that the downloaded package matches your Windows version before reinstalling.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable until the Brother DCP-T310 installer prompts for it, run setup as administrator, and close antivirus temporarily. Remove any partial install before retrying.
• Device not detected: Power on the DCP-T310, use a direct USB port instead of a hub, and try a known-good cable. Check Device Manager and Printers & scanners for an unknown USB device, then reinstall and select the correct USB port.
• Driver/version conflicts: Uninstall older Brother or generic inkjet drivers via Print Management or Apps & features, reboot, then install the DCP-T310 package matching your Windows version and architecture. Avoid mixing old and new driver versions.