The Brother DCP T220 Printer driver lets Windows communicate with your printer so you can send documents, adjust print settings, and manage everyday printing tasks. For this multifunction device, a compatible Brother software package can also enable scanning when the required scanner driver is included. Choose a download that matches your version of Windows 11, 10, 8, or 7 and your system architecture.

Key Features

• Reliable print communication: Provides the software connection needed to send print jobs from Windows applications to the Brother DCP T220.
• Adjustable output settings: Gives you access to supported options such as paper size, media type, print quality, and color preferences.
• Scanning support: A package containing the scanner driver allows compatible Windows software to receive scans from the device’s flatbed scanner.
• Device status information: When included, Brother utilities can help you check printer status and identify issues such as an empty paper tray or a connection problem.

How to Install

1. Check your Windows version. Open your computer’s system information to confirm the operating system and whether it uses a 32-bit or 64-bit architecture. Make sure the selected driver explicitly supports your setup, especially on older Windows versions.

1. Download the appropriate package. Select the Brother DCP T220 driver for your system. If you need both printing and scanning, check that the package includes both components rather than only a printer driver.

1. Prepare the printer. Complete the printer’s initial setup, load paper, and turn it on. For a USB installation, leave the USB cable disconnected from the computer until the installer asks you to connect it, unless the supplied instructions say otherwise.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if it appears, and follow the setup instructions. Connect the printer when requested and allow installation to finish. Restart Windows if prompted.

1. Test the connection. Find the printer in Windows printer settings and print a test page. If you installed scanning software, try a scan as well. If Windows does not detect the device, check the USB connection and confirm that you installed the correct driver.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable until the Brother installer asks for it, run the downloaded DCP-T220 driver as administrator, and temporarily disable antivirus if it blocks setup. Remove failed Brother DCP-T220 entries in Printers & scanners before retrying.
• Printer not detected: Use a direct USB 2.0 port on the PC, not a hub or front-panel extension. Power the DCP-T220 on, try another cable/port, and check Device Manager for an unknown USB device. Reinstall the Brother USB driver if Windows shows an unspecified device.
• Driver/version conflicts: Uninstall older Brother DCP-T220 or generic Brother printer drivers, delete leftover printer ports, restart the Print Spooler service, then install the current full driver package. Avoid mixing Windows Update/WSD drivers with the Brother package.