The Brother DCP J105 driver connects your all-in-one printer to Windows so applications can send print jobs and access supported device functions. Installing the appropriate Brother software also helps you adjust print settings and use scanning features when the package includes a scanner driver.

Key Features

• Printing controls: Choose paper size, media type, print quality, and color or grayscale output to suit documents, schoolwork, and everyday printing.
• Scanning support: A package containing the scanner driver allows compatible Windows applications to receive scans from the Brother DCP J105.
• Connection setup: Configure the printer for a USB connection or supported wireless network connection, depending on your setup and the selected installer.
• Device status information: When included, Brother utilities can display printer status and help identify issues such as missing paper or a connection problem.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7. Check the system architecture as well, and select a package explicitly listed for your operating system rather than assuming every download supports all four versions.

1. Download the appropriate driver package. Choose the Brother DCP J105 printer driver for printing, or a full software package if you also need scanning and available utilities. Review the package description to confirm which components are included.

1. Prepare the printer and connection. Turn on the printer and load paper. For a wireless installation, connect the printer and computer to the same local network. For USB setup, leave the cable disconnected until the installer requests it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if it appears, and follow the setup instructions. Select the connection method you intend to use and allow the installation to finish.

1. Verify operation. Restart Windows if prompted, then print a test page from the printer’s settings. If you installed scanning software, try a test scan too. If the device is not detected, check the USB cable or network connection before running setup again.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, uninstall any existing Brother DCP-J105 software, run the latest full driver package as administrator, and reconnect USB only when the installer prompts.
• Printer not detected: Use a direct USB port (not a hub), try another cable/port, power-cycle the DCP-J105, and confirm it appears in Devices and Printers/Device Manager. For wireless models, verify the printer and PC are on the same network.
• Driver/version conflicts or scanner missing: Remove old or generic Brother entries in Devices and Printers, install the complete DCP-J105 package matching your Windows version (not just the print driver), then restart and test print/scan.