Brother DCP-8112DN LAN Driver

The Brother DCP-8112DN LAN driver helps Windows communicate with your Brother multifunction printer over a wired network. It is intended for users setting up network printing, reconnecting the device after reinstalling Windows, or troubleshooting a missing printer connection. Although sometimes listed under Camera, this model is a multifunction printer rather than a standalone camera.

Key Features

• Wired network printing: Connects compatible Windows computers to the DCP-8112DN through your local Ethernet network.
• Printer settings access: Provides controls for supported options such as paper size, print quality, and two-sided printing.
• Support for older Windows systems: Driver packages are available for Windows 10, 8.1, 7, Vista, and XP; select the package that matches your operating system and architecture.
• Flexible setup options: Depending on the package, installation may include additional Brother utilities. Scanning features may require a separate scanner driver or a full software package.

How to Install Brother DCP-8112DN LAN Driver

1. Check your Windows version. Confirm both the operating system and whether it is 32-bit or 64-bit. For Windows 10/11 systems, check compatibility carefully: Windows 10 is listed as supported here, but Windows 11 support should be verified before installation.
2. Prepare the network connection. Turn on the printer, connect it to your router or network switch with an Ethernet cable, and ensure your computer can reach the same network.
3. Choose the correct package. Before starting your Brother DCP-8112DN LAN driver download for Windows, verify the model name and supported operating systems. Use a trusted source for a free download, and choose the latest version available for your specific Windows release.
4. Run the installer. Open the downloaded file, approve any Windows permission prompt, and follow the instructions to install the driver. Select a wired network connection when prompted.
5. Confirm the connection. Select the detected printer, complete setup, and print a test page. If discovery fails, check the printer’s network address and use manual IP entry if the installer offers it.

Keep the driver updated when a compatible update addresses a connection problem, printing issue, or system change. Review compatibility notes before replacing a working driver, especially on older Windows versions, and restart the computer if the installer requests it.

Common Issues and Fixes

• Install fails or stalls: Remove existing Brother DCP-8112DN entries in Printers & scanners and uninstall old Brother software, reboot, then run the full LAN driver package as administrator. Temporarily disable antivirus if it blocks the installer.
• Printer not detected on LAN: Confirm the DCP-8112DN has a valid IP on the same subnet as the PC; ping it, then use “Specify IP address” in the installer or Add Printer instead of auto-discovery. A DHCP reservation/static IP prevents dropouts.
• Driver/version conflicts: Delete duplicate WSD or Microsoft class-driver queues for the same printer, install only the Brother package, and set it as default. Match 32/64-bit Windows and avoid mixing USB and LAN installs.