Brother DCP-195C Driver

The Brother DCP-195C driver helps Windows communicate with your Brother all-in-one inkjet printer so you can print and use its scanning functions with the appropriate software. You may need it when setting up the device, reinstalling Windows, or troubleshooting a printer that is not recognized. Although sometimes listed under Camera, the DCP-195C is a printer, scanner, and copier—not a standalone camera.

Key Features

• Printer communication: Enables compatible Windows applications to send documents and photos to the DCP-195C.
• Print settings: Provides access to supported options such as paper size, media type, and print quality.
• Scanning support: A compatible scanner driver lets scanning applications communicate with the device; some downloads may include only the printer driver.
• Windows-specific packages: Driver options vary across Windows 10, 8.1, 7, Vista, and XP, so selecting the correct operating system and architecture matters.

How to Install Brother DCP-195C Driver

1. Check your Windows version. Confirm your operating system and whether it is 32-bit or 64-bit in Windows system information. For Windows 10/11 systems, check compatibility carefully: Windows 10 support does not automatically mean a package supports Windows 11.
2. Choose the matching package. Before starting your Brother DCP-195C driver download for Windows, review the listed operating system and included components. Select the latest version compatible with your setup, and use a trusted Brother source for a free download.
3. Prepare the device. Turn on the DCP-195C and close open applications. If the installer requires a disconnected USB cable at the start, leave it unplugged until prompted.
4. Install the driver. Open the downloaded installer and follow the on-screen instructions. Connect the USB cable when requested, and allow the installation to finish before using the device.
5. Test the setup. Restart Windows if prompted, then print a test page. If you installed scanner software, try a scan as well. If either function is unavailable, confirm that the corresponding driver component is installed.

Keep your driver updated by checking for a compatible update when printing or scanning problems arise, or after changes to Windows. Compare the available release with your installed driver rather than assuming every download is newer, and avoid replacing a working setup with a package intended for a different Windows version.

Common Issues and Fixes

• Install fails or rolls back: Disconnect the DCP-195C USB cable, run the Brother installer as administrator, and temporarily disable antivirus. Reboot before reconnecting the printer when prompted.
• Device not detected: The DCP-195C is USB-only, so connect it directly to the PC—not through a hub—and use a known-good USB cable. Power the printer on, try another USB port, then reinstall the driver.
• Version conflicts or missing scan function: Remove any existing Brother DCP-195C software and drivers via Control Panel > Programs, reboot, then install the full package matching your exact Windows version and 32/64-bit architecture. Avoid mixing Windows generic printer drivers with Brother scan software.