The Brother DCP 130C driver connects this all-in-one inkjet printer to your Windows PC, allowing applications to send print jobs and access supported device functions. Installing a compatible Brother driver can help resolve recognition problems, restore printing options, and enable scanning when the appropriate scanner software is included.

Key Features

• Printing controls: Access paper size, media type, print quality, and color settings to suit everyday documents or photo printing.
• Scanner support: A compatible scanner driver allows scanning software to communicate with the DCP 130C for digitizing documents and pictures.
• USB communication: Helps Windows recognize the printer over its USB connection and route print jobs to the correct device.
• Device-specific options: Provides settings tailored to the printer rather than relying solely on the basic controls available through a generic driver.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. The DCP 130C is an older model, so verify the selected package’s compatibility rather than assuming one download supports every Windows release.

1. Choose the appropriate driver. Select a Brother DCP 130C package that explicitly supports your operating system. If you need scanning as well as printing, check whether the download includes a scanner driver or requires a separate installation.

1. Prepare the printer and computer. Turn on the printer, close open applications, and keep the USB cable ready. For an installer-led setup, leave the cable disconnected until the installation instructions tell you to connect it.

1. Run the installation. Open the downloaded installer, allow administrator permission if prompted, and follow the on-screen directions. Connect the USB cable directly to your PC when requested. If the package has no installer, follow its accompanying manual installation instructions.

1. Verify operation. Open Windows printer settings, confirm that the Brother DCP 130C appears, and print a test page. If you installed scanner support, try a preview scan in a compatible scanning application.

If no compatible package is listed for your Windows version, check Brother’s support guidance or Windows Update for available options. Basic printing support may not provide the same features as a full driver package, and scanning availability can differ.

Common Issues and Fixes

• Install fails on newer Windows: The DCP-130C uses an older Brother driver package. Run the installer as administrator and, if needed, use Compatibility Mode for Windows 7/Vista; disconnect the USB cable until the installer prompts.
• Device not detected: This model is USB-only, so connect it directly to a USB port (not a hub), power it on, try another cable/port, then remove any “Unknown device” entry in Device Manager and reinstall.
• Driver/software conflicts: Uninstall previous Brother DCP-130C printer and scanner entries and Brother software, reboot, then install one full package; avoid mixing a Windows Update driver with the Brother installer.