The Brother 2710DW driver connects your printer with Windows so documents are sent correctly and print settings are available when you need them. Choose a driver package that matches your version of Windows 11, 10, 8, or 7 to help avoid setup problems and missing options.

Key Features

• Printer communication: Enables Windows applications to send print jobs to the Brother 2710DW through the connection configured during setup.
• Everyday print controls: Provides access to supported settings such as paper size, orientation, print quality, and copy count.
• Two-sided printing options: Lets you configure automatic duplex printing for reports, forms, and other multipage documents, helping reduce paper use.
• Connection setup: A compatible Brother installer can guide you through adding the printer over USB or a wireless network, depending on the package you select.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7. If the download offers separate system types, select the one that matches your Windows installation.
2. Select the correct driver. Check the printer’s full model name on its label before downloading. Brother uses similar model numbers, so the package should explicitly support your device and operating system.
3. Prepare the connection. Turn on the printer. For wireless setup, connect it to the same local network as your computer. If using USB, wait to attach the cable until the installer requests it.
4. Run the installer. Open the downloaded file, allow any required administrator permissions, and follow the prompts. Choose your connection method and select the detected printer.
5. Verify the installation. Restart Windows if prompted, then print a test page from the printer settings. If the printer is not detected, check its connection and confirm that you selected the correct driver package.

Common Issues and Fixes

• Install fails or rolls back: Disconnect USB, run the Brother installer as administrator, and remove older Brother software first (Control Panel > Programs; use Brother Uninstall Tool if needed). Restart before reinstalling.
• Printer not detected: For USB, use a direct rear port and a known-good cable, not a hub. For Wi-Fi/Ethernet, confirm the HL-L2710DW and PC are on the same network, then enter the printer’s IP address manually in the installer.
• Driver version conflicts: Uninstall existing HL-L2710DW entries in Devices and Printers and Print Server Properties, then install the full Brother package. Don’t mix Windows built-in and Brother drivers; restart after removal.