Bluetooth wireless hub (firmware upgrade) Driver

The Broadcom Bluetooth wireless hub (firmware upgrade) driver helps Windows recognize the hub’s firmware-upgrade interface so compatible update software can communicate with it. It is intended for users whose Bluetooth hub appears as an unknown device or requires a driver before a supported firmware update can proceed.

Before downloading, confirm that the package matches your hub’s hardware ID and Windows edition. Supported operating systems listed for this device are Windows 10, 8.1, 7, Vista, and XP; compatibility may vary by package and computer manufacturer.

Key Features

• Firmware-upgrade interface support: Helps Windows identify the device interface used during a compatible firmware-update process.
• Device recognition: May resolve a missing-driver warning when the hub is detected in upgrade mode, provided the hardware ID matches.
• Legacy Windows coverage: Offers a driver option for listed Windows versions, subject to the individual package’s requirements.
• Update preparation: Provides the communication layer required by compatible upgrade tools; the driver itself should not be assumed to include firmware or a flashing utility.

How to Install Bluetooth wireless hub (firmware upgrade) Driver

1. Identify your device. Open Device Manager, locate the hub or unknown device, and check Properties > Details > Hardware Ids. Note your Windows version and whether it is 32-bit or 64-bit.
2. Choose a matching package. Before starting your Bluetooth wireless hub (firmware upgrade) driver download for Windows, compare the package’s supported hardware and operating systems. Choose the latest version explicitly compatible with your device, not simply the newest available file.
3. Download and extract. Obtain the package from a trusted source. If choosing a free download, verify its source and any available digital signature before running it.
4. Install the driver. Use the included installer, or select Update driver in Device Manager and browse to the extracted driver folder. Follow the supplied instructions and restart if requested.
5. Check the result. Confirm that Device Manager no longer reports a driver error. If a firmware update is needed, use only the manufacturer-approved utility and firmware, and do not disconnect power during flashing.

Keep the driver updated when a compatible release addresses a problem or is recommended by your device manufacturer. For Windows 10/11 systems, check support separately: Windows 10 is listed here, but Windows 11 compatibility is not confirmed. A driver update and a firmware update are different procedures, so review the instructions before starting either.

Common Issues and Fixes

• Firmware installer fails or stops early: Confirm the hub is in firmware-upgrade mode and connected directly to a rear USB port; run the Broadcom package as administrator, close other Bluetooth utilities, and do not unplug during flashing. If it fails, reconnect and retry before closing the installer.
• Hub not detected: Check Device Manager for an unknown USB device or Broadcom radio, disable USB selective suspend for the hub/root port, try another cable/port, and remove stale Bluetooth pairings. Power-cycle the hub and host to clear a stuck upgrade state.
• Driver/version conflicts: Remove older Broadcom/Widcomm or generic Bluetooth drivers, stop the Bluetooth service, reboot, then install the matching firmware/driver package. Verify the hardware ID and firmware version in Device Manager; roll back if Windows replaces the driver.