The Bixolon SRP 350plusIII driver connects this thermal receipt printer with Windows, allowing compatible point-of-sale software and other applications to send print jobs correctly. Install the appropriate Bixolon driver for Windows 11, 10, 8, or 7 to access printer settings and help ensure receipts print with the intended layout.

Key Features

• Windows printing support: Makes the SRP 350plusIII available to compatible applications through the Windows printing system.
• Receipt layout controls: Provides settings for supported paper widths, orientation, and other layout options to help keep text and totals aligned.
• Printer-specific options: Allows access to supported receipt-printing features, such as paper cutting, where available in the driver and printer configuration.
• Connection configuration: Helps Windows direct print jobs to the correct printer port for your unit’s installed interface, such as USB or Ethernet.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type. Choose a driver package that explicitly supports both your operating system and the Bixolon SRP 350plusIII.

1. Prepare the printer. Load receipt paper, connect the power supply, and switch the printer on. For a USB installation, follow the installer’s instructions about when to connect the cable. For a network setup, make sure the printer is reachable from your PC.

1. Run the driver installer. Extract the downloaded package if necessary, then launch the setup program. Allow administrator access if prompted and select the correct printer model when requested.

1. Select the connection and port. Follow the setup prompts for your installed interface. A network connection may require the printer’s IP address, while a USB connection typically uses a port created when Windows detects the device.

1. Test and adjust the settings. Open the printer’s properties in Windows and print a test page. Then check the paper width and receipt layout in both the driver preferences and your point-of-sale application. If output is missing or misaligned, verify the selected port and paper settings before reinstalling.

Common Issues and Fixes

• Install fails or printer not listed: Remove older Bixolon SRP-350plus/III entries in Printers & scanners and Device Manager, reboot, then run the SRP-350plusIII installer as administrator.
• Device not detected: Confirm the interface type—USB, serial, or Ethernet—and cable. Try a direct rear USB port; for USB check Device Manager for unknown devices, and for serial/Ethernet verify the COM port or IP address with a printer self-test.
• Version conflicts or garbled output: Uninstall old generic POS/Bixolon drivers, delete stale queues and ports, install the latest SRP-350plusIII driver, set the correct paper width/emulation, and restart the Print Spooler service.