The AVerMedia Hybrid TV Tuner Card A16C DVB T PAL SECAM FM driver helps Windows recognize the tuner and communicate with its television and radio hardware. It provides the connection needed for compatible viewing software to access the card’s supported reception modes, including DVB-T digital TV, PAL/SECAM analog TV, and FM radio.

Key Features

• Hardware detection: Enables Windows to identify the A16C tuner and make its functions available to compatible applications.
• Digital and analog reception support: Provides driver-level access to DVB-T broadcasts and PAL/SECAM analog signals where those services remain available.
• FM radio access: Allows compatible radio software to use the card’s FM tuner with an appropriate antenna connection.
• TV software integration: Supports communication between the tuner and viewing or recording applications. Available controls and recording options depend on the software you use.

How to Install

1. Check your system and hardware. Confirm that your card is the AVerMedia A16C, then check your Windows version and whether your installation is 32-bit or 64-bit. For Windows 11, 10, 8, or 7, choose a package that explicitly supports your system; older tuner drivers may not work on newer Windows releases.

1. Download and extract the driver. Obtain the matching AverMedia driver package and extract it if it comes in a compressed archive. Review any included instructions for prerequisites or model-specific installation guidance.

1. Run the installer. Close TV and radio applications, then launch the setup program with administrator permissions. Follow the prompts. If no installer is provided, open Device Manager, locate the tuner or unidentified multimedia device, select Update driver, and browse to the extracted folder.

1. Restart and verify detection. Restart your computer if prompted, then check Device Manager for warning icons. If installation fails, recheck the hardware model and driver compatibility rather than forcing an unsupported package.

1. Configure reception. Open compatible TV or radio software, select the A16C tuner, connect the appropriate antenna or signal source, and scan for channels. Choose the correct reception mode and regional settings.

The driver alone does not include every tool needed to watch or record broadcasts. You may need a separate compatible application, and reception depends on your antenna, local signal availability, and broadcast standard. DVB-T support does not imply DVB-T2 compatibility.

Common Issues and Fixes

• Installer fails or rolls back: Disconnect the A16C card, run the AVerMedia setup as administrator, and temporarily disable antivirus. Use the package matching your Windows version/architecture; generic BDA drivers may install but not initialize the hybrid tuner/FM.
• Device not detected: In Device Manager, look for Unknown device or AVerMedia under Sound, video and game controllers. Reseat the card, install motherboard chipset drivers, then scan for hardware changes. If a yellow mark remains, update the driver manually and point to the extracted INF.
• Version conflicts: Uninstall older AVerMedia TV/FM drivers and software, remove hidden tuner devices, and reboot before installing the A16C package. Don’t mix 32-bit/64-bit or old proprietary and BDA drivers; keep one matching driver set.