The AVerMedia DVD EZMaker 7 connects compatible analog video sources to a Windows PC for capture and digitization. Its driver allows Windows and compatible capture software to communicate with the device, helping you transfer recordings from equipment such as a VCR or analog camcorder.

Key Features

• Device recognition: Enables Windows to identify the AVerMedia DVD EZMaker 7 as a capture device rather than leaving it listed as unknown hardware.
• Analog video capture support: Provides the device-level communication needed to bring video from supported composite or S-Video sources into compatible recording software.
• Audio capture communication: Supports the hardware connection used to transfer audio alongside your video when the source and cables are configured correctly.
• Capture application access: Makes the device available to supported software, where you can select inputs, preview footage, and record. Editing and DVD authoring depend on the application you use, not the driver alone.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type in Windows Settings or Control Panel. Select a driver package that explicitly supports your operating system and the AVerMedia DVD EZMaker 7; compatibility can vary between releases.

1. Download and prepare the driver. Save the appropriate AverMedia driver package to your computer. If it is compressed, extract its contents before starting installation. Close any video capture applications to prevent them from accessing the device during setup.

1. Run the installer. Open the setup file and approve the Windows permission prompt if requested. Follow the installation instructions, connecting or disconnecting the USB capture device when prompted. Restart your PC if the installer asks you to.

1. Connect your video equipment. Plug the DVD EZMaker 7 into a USB port on your computer, then attach the supported video and audio connections from your source equipment. In Device Manager, check that the capture device appears without a warning icon.

1. Test a short recording. Launch compatible capture software, choose the AVerMedia device, and select the input that matches your cable connection. Start playback on the source and record a short clip to verify both picture and sound before transferring a full recording.

Common Issues and Fixes

• Driver install fails: Run the AVerMedia installer as administrator and connect the EZMaker 7 to a USB 2.0 port directly on the PC. If Windows blocks the driver, check driver signature settings or use the latest package for your Windows version.
• Device not detected: Open Device Manager and look for an unknown/USB video device. Try another USB cable/port, avoid unpowered hubs, and reconnect after installation. Select the EZMaker 7 as the video source in your capture software.
• Version conflicts: Uninstall older AVerMedia capture drivers and reboot before installing the new package. In Device Manager, remove old/hidden devices and rescan. Keep one driver version installed and avoid mixing vendor software with generic USB video drivers.