The ASUS VS238 is a monitor, not a graphics card, so its monitor driver serves a different purpose from your GPU driver. An appropriate ASUS monitor INF package helps Windows identify the display and apply the information supplied for that model; it does not replace the NVIDIA, AMD, or Intel driver responsible for graphics performance.

For Windows 11, 10, 8, and 7, check the download’s compatibility notes and the full model number on your monitor’s label before installing.

Key Features

• Display identification: A matching monitor INF can identify the ASUS VS238 more specifically in Device Manager rather than leaving it listed as a generic monitor.
• Monitor configuration information: The package may supply display characteristics that help Windows configure supported operating modes.
• Color profile support: If an ICC or ICM profile is included, it can be selected in Windows Color Management as a reference for compatible applications. This is not a substitute for individual display calibration.
• Separate from graphics drivers: Monitor information works alongside your GPU software. Updating it will not add graphics-card features, increase gaming performance, or enable modes beyond the display’s capabilities.

How to Install

1. Confirm the exact model and operating system. Read the label on the back of the monitor, including any letters following VS238. Verify that the package supports your variant and Windows version; do not assume an older package is approved for Windows 11.
2. Download and extract the matching package. Save it to an accessible folder and extract any compressed files. Review the included instructions for model-specific requirements.
3. Open Device Manager. Locate it through Windows search or Control Panel, expand Monitors, and select the entry corresponding to the connected ASUS display. If several monitors are attached, confirm which entry you are updating.
4. Install the monitor information. Right-click the entry, choose Update driver or Update Driver Software, then select the option to browse your computer. Point Windows to the extracted folder and follow the prompts. Do not force installation if Windows reports an incompatible driver.
5. Check the display settings. Restart if prompted, then confirm the resolution and refresh rate in Windows display settings. If a color profile was supplied, follow the package instructions to associate it with the correct monitor.

If no compatible ASUS package is available, Windows’ built-in Plug and Play monitor support will often provide normal operation. For missing resolutions, flickering, or graphics errors, also check the display cable and your graphics-card driver.

Common Issues and Fixes

• Install fails or “best driver already installed.” Windows often keeps the monitor on Generic PnP Monitor. In Device Manager, expand Monitors, right-click ASUS VS238, choose Update driver > Browse my computer > Let me pick > Have Disk, then select the downloaded INF. Run as administrator and use signed ASUS files.
• Monitor not detected. Confirm the OSD input matches the connected port, reseat the video cable, test another cable/port/PC, and power-cycle both devices. The VS238 should appear as Generic PnP Monitor before the ASUS INF is installed.
• Version/color-profile conflicts. Remove old ASUS monitor entries and stale ICM profiles, reboot, then install the latest package. If resolution or refresh rate is wrong, set it in Windows Display Settings rather than reinstalling GPU drivers.