The Alcatel HS USB Android GPS Port (COM94) driver helps Windows recognize the GPS-related serial interface exposed by a compatible Alcatel device over USB. It allows supported software to communicate with that interface through a virtual COM port; the COM94 label identifies the port assignment on your computer, not a separate hardware model.

Key Features

• USB interface recognition: Helps Windows identify the Alcatel GPS port correctly instead of leaving it listed as an unknown device or an interface with a missing driver.
• Serial communication support: Provides access to the GPS-related interface for compatible applications and service tools. Available functions depend on the connected Alcatel device, its firmware, and the software being used.
• Device Manager visibility: Makes it easier to check the interface’s status and assigned COM port when troubleshooting connection problems.
• Windows driver options: Intended for use with Windows 11, 10, 8, and 7 when the downloaded package matches your device and operating system architecture. Verify the package’s compatibility before installation.

How to Install

1. Check your system and device. Confirm your Windows version and whether it uses a 32-bit or 64-bit architecture. If the interface already appears in Device Manager, open its Properties and check the hardware IDs to help verify that the driver matches.

1. Download and extract the matching driver. Choose a package intended for the Alcatel HS USB Android GPS Port interface and your Windows version. Extract compressed files to an accessible folder before proceeding.

1. Connect the Alcatel device. Use a USB cable that supports data transfer. The GPS-related interface must be exposed by the device before Windows can detect it; follow the device’s documentation if a specific USB mode is required.

1. Install the driver. Run the included installer if one is provided. Otherwise, open Device Manager, right-click the relevant Alcatel interface or unidentified device, select Update driver, and choose Browse my computer for drivers. Point Windows to the extracted folder and follow the prompts.

1. Verify the connection. Restart Windows if requested, then check Device Manager for a correctly recognized port without a warning icon. Select its current COM number in your compatible application—it may differ from COM94.

If installation fails, recheck the hardware ID and package compatibility rather than forcing an unrelated driver. Installing this driver alone does not enable GPS features that the device or application does not support.

Common Issues and Fixes

• Install fails: Run the Alcatel driver installer as administrator and match it to Windows 32/64-bit. If Windows blocks it with an unsigned-driver error, use the vendor-signed package; only disable signature enforcement temporarily if Alcatel explicitly supports it.
• Device not detected / no COM94: Use a data-capable USB cable, connect directly to the PC, and avoid hubs. In Device Manager, check Ports (COM & LPT) for unknown devices; set the Android USB mode to modem/GPS or enable USB debugging as required, then rescan.
• COM port conflict or stale driver: Uninstall old “Alcatel HS USB Android GPS Port” entries and drivers, reboot, reinstall, then reassign COM94 in Ports properties if another device occupies it.