Adafruit Flora (COM5) Driver

The Adafruit Flora (COM5) driver helps Windows recognize the USB serial connection used by the FLORA wearable electronics board from Adafruit Industries. It is useful for makers, students, and developers who need to upload sketches or exchange serial data with the board through compatible development software.

Key Features

• USB serial communication: Enables compatible software to communicate with FLORA over its USB connection for programming and serial monitoring.
• Device identification: Helps Windows associate the board with the appropriate serial interface so you can select it in your development environment.
• Windows compatibility: Intended for supported setups running Windows 10, 8.1, 7, Vista, or XP. Check the individual package requirements before installing, especially on older systems.
• COM port access: Makes the board accessible through an assigned serial port. Although this device is labeled COM5, Windows may assign a different number when you reconnect it or use another computer.

How to Install Adafruit Flora (COM5) Driver

1. Check your system. Confirm your Windows version and whether it is 32-bit or 64-bit. If you are comparing Windows 10/11 compatibility, note that Windows 11 is not included in this page’s supported OS list; verify support separately.
2. Choose a compatible package. Before starting an Adafruit Flora (COM5) driver download for Windows, review its compatibility information. Select the latest version that explicitly supports your operating system, and use a trusted free download source rather than an unrelated driver-update utility.
3. Install the driver. Extract the downloaded archive if necessary, then follow the included installation instructions. If the package requires manual installation, open Device Manager, locate the board or unidentified USB device, choose Update driver, and browse to the extracted driver folder.
4. Connect the board. Use a USB data cable, not a charge-only cable. If Windows does not detect FLORA, try another USB port or cable before reinstalling.
5. Confirm the connection. Check Device Manager under Ports (COM & LPT) for the board’s assigned port. Select the matching port and FLORA board configuration in your development software, then test communication with a simple sketch.

Keep the driver updated when a compatible release addresses connection problems or supports changes to your system. Before you update, check the package notes and OS requirements; a working setup does not necessarily need a newer driver simply because one is available.