IntelliWand USB RS-232 Port (COM3) Driver

The IntelliWand USB RS-232 Port (COM3) driver allows Windows to recognize Pentair’s USB-to-serial interface and make it available to compatible software as a COM port. You may need it when setting up an IntelliWand connection, reinstalling Windows, or troubleshooting a device that appears as an unknown USB device instead of a serial port.

Key Features

• USB-to-serial communication: Provides the driver support needed for compatible applications to communicate through the IntelliWand RS-232 interface.
• COM port access: Makes the serial connection available in Windows Device Manager, where you can check its assigned port number.
• Support for listed Windows versions: Intended for Windows 10, 8.1, 7, Vista, and XP, subject to the compatibility requirements of the individual driver package.
• Setup and troubleshooting support: Installing the correct package can resolve recognition problems caused by a missing or incompatible driver.

How to Install IntelliWand USB RS-232 Port (COM3) Driver

1. Check your Windows edition and system type. Confirm whether your installation is 32-bit or 64-bit before choosing an IntelliWand USB RS-232 Port (COM3) driver download for Windows. For Windows 10/11 systems, note that Windows 10 is listed as supported; Windows 11 compatibility requires separate confirmation.
2. Select a compatible package. Look for the latest version that explicitly supports your operating system and hardware. If choosing a free download, verify its source and check any available publisher or digital-signature information before opening it.
3. Prepare the files. Extract the archive if necessary and read any included instructions. Connect or disconnect the IntelliWand interface as directed by the package documentation.
4. Install the driver. Run the supplied installer, if included. For a manual installation, open Device Manager, locate the interface, select Update driver, and browse to the extracted driver folder. Restart Windows if prompted.
5. Verify the connection. Reconnect the device and check the Ports (COM & LPT) section in Device Manager. Windows may assign a number other than COM3; select the actual assigned COM port in your compatible application.

Keep the driver updated when a compatible release addresses a connection issue or supports changes to your system. Before you update, review the package notes and retain a copy of the working driver so you can restore it if necessary.