Seletek Controller (COM28) Driver

The Seletek Controller (COM28) driver enables Windows to communicate with the USB-connected controller from Lunatico Astronomia S. L, allowing compatible astronomy software to access the device through a serial COM port. It is intended for users setting up their controller, restoring a missing connection, or reinstalling the driver after a Windows change. The COM28 label identifies the assigned port on a particular system; your computer may assign a different number.

Key Features

• USB communication: Provides the driver support needed for Windows to recognize the controller and make it available to compatible applications.
• Serial-port access: Allows software that communicates through a COM port to connect to the controller using the port shown in Device Manager.
• Support for listed Windows versions: Intended for Windows 10, 8.1, 7, Vista, and XP, subject to the compatibility requirements of the individual driver package.
• Connection troubleshooting: Installing the appropriate driver can help resolve an unrecognized device or a missing COM-port entry when the cause is a missing or incorrect driver.

How to Install Seletek Controller (COM28) Driver

1. Check your Windows version and architecture. Confirm whether your system is 32-bit or 64-bit before choosing a package. For Windows 10/11 systems, note that Windows 10 is listed as supported, while Windows 11 compatibility requires separate confirmation.
2. Choose a suitable package. Before starting your Seletek Controller (COM28) driver download for Windows, verify the vendor, supported operating systems, and package details. If a free download is offered, ensure it contains the correct driver rather than an unrelated updater.
3. Prepare the files. Extract the archive if necessary and read any included instructions, particularly guidance about when to connect or disconnect the controller.
4. Install the driver. Run the supplied installer, or use Device Manager’s “Update driver” option and browse to the extracted driver folder. Restart Windows if prompted.
5. Verify the connection. Connect the controller, check Device Manager for its assigned COM port, and select that port in your compatible astronomy application. Do not assume it will always be COM28.

Keep the driver updated when a compatible release addresses a problem or supports a system change. Check the latest version against your Windows edition before you update, and retain a working installer in case you need to restore your previous setup.