The Microsoft 1394 OHCI Compliant Host Controller (oude versie) driver enables Windows to communicate with compatible IEEE 1394, commonly known as FireWire, hardware. This legacy driver supports the host controller that connects devices such as older digital camcorders, external storage drives, and professional audio interfaces to your PC.

Key Features

• FireWire controller support: Provides the Windows driver interface for compatible OHCI-compliant IEEE 1394 host controllers, allowing connected equipment to exchange data with the computer.
• Legacy device compatibility: The older driver version may help with FireWire equipment or software that does not work reliably with a newer driver stack. Results depend on the controller and connected device.
• Support across Windows generations: Driver selection covers Windows 10, 8.1, 7, Vista, and XP. Choose a package that specifically matches your operating system and its 32-bit or 64-bit architecture.
• Device Manager integration: Lets you check controller status, view driver information, and update or roll back the installed driver through Windows.

How to Install

1. Confirm your hardware and Windows version. Open Device Manager and locate the controller under “IEEE 1394 Bus host controllers.” Check its properties and confirm your Windows edition and system architecture before choosing a download.
2. Select a compatible driver package. Verify that the package supports your controller and operating system. Legacy FireWire driver packages are not interchangeable across every Windows version.
3. Prepare for the change. Close applications using FireWire devices and safely disconnect any external storage attached through the controller. Create a restore point if System Protection is available.
4. Install the driver. Run the supplied installer, if included, and follow its instructions. For a manual installation, extract the files, right-click the controller in Device Manager, select the driver update option, and browse to the extracted folder. Select the legacy controller driver only if Windows lists it as compatible.
5. Restart and test. Restart Windows if prompted, reconnect your FireWire equipment, and check for warning icons in Device Manager. Test the device in its usual application; if the change causes problems, use the controller’s driver properties to roll back when available.

This driver handles the FireWire host controller, not every connected peripheral. Some audio interfaces, cameras, or other equipment may also require a separate manufacturer driver or application.

Common Issues and Fixes

• Install fails or shows Code 10/28/52: The old Microsoft 1394 OHCI driver may be blocked by Windows driver signing or a newer inbox driver. In Device Manager, right-click the controller, choose Update driver > Browse my computer > Let me pick, and select the compatible 1394 OHCI Compliant Host Controller or Legacy entry. Restart after installing.

• Device not detected: Check that IEEE 1394 is enabled in BIOS/UEFI and not disabled in Device Manager. Try another FireWire cable/port, confirm the attached device is powered, and scan for hardware changes. Remove hidden ghost 1394 devices in Device Manager, then rescan.

• Version conflicts after Windows Update: Windows may replace the old driver with a newer OHCI driver, causing instability. Use Roll Back Driver if available, or uninstall the current 1394 controller driver, restart, and reinstall the matching old-version package. Avoid mixing OEM and Microsoft 1394 drivers.