ZTE HS-USB NMEA Device (COM3) Driver

The ZTE HS-USB NMEA Device (COM3) driver helps Windows communicate with the NMEA serial interface exposed by compatible ZTE USB hardware. This interface can carry GPS positioning data to compatible applications when supported by the connected device. You may need the driver if Device Manager shows an unrecognized interface, a warning icon, or a COM port that your positioning software cannot access.

Key Features

• NMEA interface support: Enables compatible software to access positioning data from supported ZTE hardware through a virtual serial connection.
• COM port recognition: Helps Windows identify the device as a serial interface. Although this device is listed as COM3, Windows may assign a different port number on your computer.
• Legacy Windows coverage: Listed operating systems include Windows 10, 8.1, 7, Vista, and XP. Choose a package that explicitly supports your Windows version and system architecture.
• Interface-specific functionality: Supports the NMEA connection rather than acting as a general-purpose USB driver. Other interfaces on the same ZTE device may require separate drivers.

How to Install ZTE HS-USB NMEA Device (COM3) Driver

1. Confirm the device identity. Open Device Manager, locate the ZTE interface or unknown device, and check Properties > Details > Hardware Ids. Match these identifiers against the driver package’s supported hardware.
2. Check compatibility before downloading. For a ZTE HS-USB NMEA Device (COM3) driver download for Windows, verify the supported operating system and whether the package is intended for 32-bit or 64-bit Windows. If comparing Windows 10/11 options, note that Windows 11 is not included in the supplied compatibility list.
3. Obtain and extract the package. Prefer a manufacturer-provided or otherwise trusted free download. Check any available digital signature and extract compressed files before proceeding.
4. Install the driver. Run the included installer, if provided. Alternatively, right-click the device in Device Manager, select Update driver, and browse to the extracted driver folder. Restart if prompted.
5. Verify the connection. Reconnect the hardware and check that the interface appears without a warning icon. Select its assigned COM port in your compatible NMEA application.

Keep the driver updated when a compatible release addresses a connection problem or supports a system change. Before you update, confirm that the latest version still supports your specific ZTE hardware and Windows edition; a newer package is not automatically the right match.