ACTScom NMEA Port (COM5) Driver

The ACTScom NMEA Port (COM5) driver helps Windows recognize the NMEA serial interface exposed by compatible Zte USB hardware, allowing software to communicate with the device through a virtual COM port. You may need it if this interface appears as an unknown device, shows a warning in Device Manager, or is unavailable to an application that uses NMEA data.

Key Features

• USB-to-serial communication: Provides access to the device’s NMEA interface through a virtual serial port, identified here as COM5.
• NMEA application access: Enables compatible software to receive NMEA messages when the connected hardware and its configuration support that function.
• Windows compatibility: Supported operating systems listed for this device are Windows 10, 8.1, 7, Vista, and XP; select a package that matches your Windows version and architecture.
• Device recognition: Helps Windows identify the interface correctly rather than leaving it listed as an unconfigured USB device.

How to Install ACTScom NMEA Port (COM5) Driver

1. Check your system and device. Confirm your Windows version and whether it is 32-bit or 64-bit. In Device Manager, check the interface’s hardware IDs to help verify that the driver matches your Zte hardware.
2. Choose a compatible package. Before starting your ACTScom NMEA Port (COM5) driver download for Windows, review the package’s supported systems. For Windows 10/11, do not assume identical compatibility: Windows 11 is not included in the supplied support list.
3. Download and extract the files. Choose a trusted source for a free download, and extract the archive if necessary. Use the latest version explicitly compatible with your device and operating system.
4. Install the driver. Run the included installer, if available, and follow its connection instructions. For a manual installation, open Device Manager, right-click the relevant interface, select Update driver, and browse to the extracted driver folder.
5. Verify the connection. Restart if prompted, then check Device Manager for the port and any remaining warnings. Select the assigned COM port in your application; Windows may assign a number other than COM5.

Keep a copy of a working driver before you update. A newer compatible release may address connection or recognition issues, but updating is not a substitute for checking the USB connection, device configuration, and application port settings.