Qualcomm HS-USB NMEA 9027 (COM14) Driver

The Qualcomm HS-USB NMEA 9027 (COM14) driver helps Windows recognize the USB-connected NMEA interface used by compatible Qualcomm-based hardware to provide GPS/GNSS positioning data over a virtual serial port. Listed under Qualcomm Atheros, this USB device may need a driver if it appears as an unknown device in Device Manager or if navigation software cannot access its positioning data.

Key Features

• NMEA interface recognition: Enables Windows to identify the device’s serial interface so compatible applications can receive positioning messages when supported by the hardware.
• Virtual COM port access: Allows navigation, mapping, and diagnostic software to communicate through an assigned port. COM14 is the current port designation; Windows may assign a different number after reconnection or reinstallation.
• Legacy Windows compatibility: Driver packages may support Windows 10, 8.1, 7, Vista, and XP. Check the individual package for your Windows edition and 32-bit or 64-bit architecture.
• Connection troubleshooting: Installing a matching driver can resolve recognition problems caused by a missing or incompatible driver, though it cannot fix hardware faults or guarantee a GPS signal.

How to Install Qualcomm HS-USB NMEA 9027 (COM14) Driver

1. Check your system and hardware. Confirm your Windows version and architecture. In Device Manager, open the device’s Properties and check its Hardware IDs to help identify a matching package.
2. Choose a compatible package. Before starting a Qualcomm HS-USB NMEA 9027 (COM14) driver download for Windows, verify the supported hardware and operating systems. If a free download is available, prefer a trusted device-manufacturer source and check its digital signature.
3. Extract and install. Unzip the downloaded archive if necessary. Run the supplied installer, or right-click the device in Device Manager, select Update driver, and browse to the extracted driver folder.
4. Reconnect and verify. Restart Windows if prompted, then reconnect the hardware. Confirm that the NMEA interface appears without a warning icon and note its assigned COM port.
5. Configure your application. Select that COM port in your navigation or diagnostic software. Follow the hardware manufacturer’s instructions for enabling positioning output if data is not available.

Keep the driver updated when a compatible release addresses a problem or improves support. The latest version is not always suitable for older hardware, so review compatibility before each update. For Windows 10/11 systems, note that Windows 10 support does not establish Windows 11 compatibility; confirm explicit manufacturer support before installing on Windows 11.