The Canon PIXMA MG2420 driver lets Windows communicate with this compact all-in-one printer so you can print documents and photos and use its scanning functions. Although it may appear under a Network category, the MG2420 connects to a computer by USB rather than built-in Wi-Fi or Ethernet. For Windows 11, 10, 8, or 7, check that the selected Canon package explicitly supports your operating system before downloading.

Key Features

• Printing controls: Access supported options for paper size, media type, print quality, and page layout through the printer’s Windows settings.
• Scanner support: A compatible multifunction driver package enables the MG2420’s flatbed scanner to work with supported scanning software.
• USB device recognition: Helps Windows identify the printer correctly and route print jobs to the appropriate device.
• Maintenance options: Depending on the package, Canon utilities can provide nozzle checks, print-head cleaning, alignment, and status information.

How to Install

1. Confirm your Windows version. Check your system settings to identify whether you use Windows 11, 10, 8, or 7, along with the system type where applicable. Match those details to the driver’s listed compatibility; do not assume an older package supports a newer Windows release.
2. Choose the correct download. Select a Canon driver package specifically listing the PIXMA MG2420. If you need scanning as well as printing, review the package description to confirm that scanner components are included.
3. Prepare the printer. Connect its power cable, turn it on, and make sure ink cartridges and paper are installed. Keep the USB cable disconnected from the computer until the installer requests it, unless the package instructions say otherwise.
4. Run the installer. Open the downloaded setup file, approve the Windows permission prompt if it appears, and follow the on-screen instructions. Connect the printer directly to an available USB port when prompted.
5. Check the connection. After setup finishes, confirm that the Canon PIXMA MG2420 appears in Windows printer settings and print a test page. If scanner support was installed, try a preview scan as well. Restart the computer if requested.

If installation fails, verify the model and operating-system match before trying again. A direct USB connection and a known-working cable can help rule out connection problems.

Common Issues and Fixes

• Install fails or stalls: Stop the Print Spooler service, run the Canon setup as administrator, disconnect USB until prompted, and remove older Canon PIXMA/MP drivers before retrying.
• Printer not detected: Use a direct USB 2.0 port, not a hub; confirm the MG2420 is powered on; try another cable; then uninstall it in Devices and Printers and reinstall.
• Driver/version conflicts: Remove duplicate “Canon MG2400 series” entries in Print Management, match 32/64-bit Windows, install the Canon IJ driver, and reboot before scanning.