SAMSUNG Mobile USB Remote NDIS Network Device #2 Driver

The SAMSUNG Mobile USB Remote NDIS Network Device #2 driver lets Windows recognize a compatible Samsung phone or tablet as a network adapter when USB tethering is enabled. It is useful if you want to share your mobile internet connection with a PC, or if Windows lists the device with a warning icon and cannot establish a tethered connection.

Key Features

• USB network connectivity: Enables compatible Samsung mobile devices to provide a network connection to a Windows computer through USB tethering.
• Remote NDIS support: Helps Windows communicate with the mobile device using the Remote Network Driver Interface Specification.
• Device recognition: Provides the driver support needed for the tethering adapter to appear correctly under Network adapters in Device Manager.
• Windows compatibility: Driver packages may support Windows 10, 8.1, 7, Vista, and XP. Check the individual package for your operating system and 32-bit or 64-bit architecture.

How to Install SAMSUNG Mobile USB Remote NDIS Network Device #2 Driver

1. Check your system and device. Confirm your Windows version and system architecture. In Device Manager, check the adapter’s hardware IDs if you need to distinguish between similar Samsung device entries. The “#2” suffix typically identifies an additional device instance, not a separate hardware model.
2. Choose a compatible package. Before starting your SAMSUNG Mobile USB Remote NDIS Network Device #2 driver download for Windows, verify the package’s supported systems and source. Use a trusted free download, and select the latest version that explicitly supports your setup. For Windows 10/11 searches, note that Windows 11 support is not established by the compatibility list here.
3. Connect and enable tethering. Attach your Samsung device using a data-capable USB cable, unlock it, and enable USB tethering in its connection settings. Menu names vary by model; carrier restrictions or mobile data charges may apply.
4. Install the driver. Run the supplied installer, if included. For an extracted driver package, open Device Manager, right-click the relevant adapter or unidentified device, select Update driver, and browse to the extracted folder.
5. Verify the connection. Restart if prompted, reconnect the device, and check that the adapter appears without a warning icon. Test internet access with USB tethering enabled.

Keep the driver updated when a compatible update addresses connection problems or improves support for your system. Prefer a verified, compatible release over a newer package intended for different hardware or Windows versions.