ShipModul MiniPlex NMEA Multiplexer Driver

The ShipModul MiniPlex NMEA Multiplexer driver enables Windows to communicate with compatible USB-connected MiniPlex units through an FTDI-based interface. It is needed by boat owners, marine technicians, and navigation software users who connect a MiniPlex multiplexer to a PC to work with NMEA data from onboard instruments.

Key Features

• USB communication support: Provides the FTDI driver interface needed for Windows to recognize compatible MiniPlex hardware.
• Virtual COM port access: Allows software that supports serial connections to communicate with the multiplexer using an assigned COM port.
• Marine software connectivity: Supports the connection between the PC and multiplexer so compatible applications can receive available NMEA instrument data.
• Support for listed Windows systems: Intended for Windows 10, 8.1, 7, Vista, and XP, provided you select a package that matches your operating system and hardware.

How to Install ShipModul MiniPlex NMEA Multiplexer Driver

1. Check your MiniPlex model and Windows edition. Confirm that your unit uses an FTDI USB interface, then identify whether Windows is 32-bit or 64-bit. If you are comparing Windows 10/11 compatibility, note that Windows 11 is not included in the supplied support list and requires separate verification.
2. Select a compatible package. Before starting your ShipModul MiniPlex NMEA Multiplexer driver download for Windows, check the supported models and operating systems. Choose the latest version that explicitly supports your setup; a newer release may not support older Windows editions.
3. Download and prepare the files. Use a trusted source for the free download, extract the archive if necessary, and review any included installation instructions.
4. Install the driver. Run the supplied installer, following its instructions about when to connect the multiplexer. If the package contains driver files only, use Device Manager’s Update driver option and browse to the extracted folder.
5. Verify the connection. Connect and power the MiniPlex as instructed by its documentation. Check Device Manager for the assigned COM port, then select that port and the appropriate communication settings in your navigation or configuration software.

Keep the driver updated when a compatible release addresses connection problems or supports changes to your Windows installation. Before you update, check the release notes and retain a copy of your working driver, especially if you rely on an older PC for onboard navigation.