The Brother MFC L2716DW driver helps Windows communicate with your multifunction printer, allowing applications to send print jobs and use supported device settings. Installing the appropriate Brother software can also enable scanning features, depending on the package you choose. Select a download that matches your version of Windows 11, 10, 8, or 7 and your system architecture.

Key Features

• Print settings within easy reach: Access supported options such as paper size, print quality, orientation, and automatic two-sided printing through the printer preferences.
• Scanning support: A compatible scanner driver lets supported Windows applications receive documents from the flatbed or automatic document feeder. Check the package description if you need both printing and scanning.
• Flexible connection setup: Use the appropriate installer to configure a USB, Ethernet, or wireless connection, depending on how the printer is connected to your computer or local network.
• Correct device recognition: The model-specific driver helps Windows identify the printer and display its available capabilities rather than relying solely on a basic printing interface.

How to Install

1. Check your Windows version. Open your computer’s system information and confirm the Windows edition and whether it uses a 32-bit or 64-bit system. Choose a Brother MFC L2716DW package listed for that configuration; package availability and included features may vary by OS.

1. Download the required package. Choose a printer driver for printing only, or a full driver and software package when available if you also need scanning and setup tools. Save the installer somewhere easy to find.

1. Prepare the connection. Turn on the printer. For a network installation, make sure the printer and computer can communicate on the same local network. For USB setup, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, allow administrator access if prompted, and follow the setup instructions. Select your connection method and confirm the correct printer when it appears.

1. Verify the installation. Restart Windows if requested, then print a test page from the printer’s settings. If you installed scanning software, scan a document as well to confirm that both functions are ready to use.

Common Issues and Fixes

• Installer fails or stops midway: Download the full driver package for MFC-L2716DW from Brother, not just the basic/scan add-on. Run as administrator, disconnect USB until prompted, and temporarily disable antivirus/security prompts. If it still fails, uninstall previous Brother software and reboot.
• Device not detected: Confirm MFC-L2716DW is powered on and connected. For USB, use a direct rear-port cable, not a hub. For network, print a network configuration page, verify the printer IP, and add it using a standard TCP/IP port.
• Version/driver conflicts: Remove old Brother MFC drivers and leftover ports in Printers & scanners before installing. Match the driver to your Windows version/architecture; avoid mixing Microsoft generic and Brother full packages. Reboot after uninstall/install.