The Brother MFC 9460CDN Printer driver allows Windows to communicate with your color laser multifunction printer and apply the correct settings to print jobs. Installing the appropriate Brother driver helps you access device-specific options instead of relying on a basic Windows printing setup.

Key Features

• Color and monochrome print controls: Adjust available quality and color settings for documents, presentations, and everyday office printing.
• Automatic duplex printing: Access two-sided printing options to reduce paper use and keep multipage documents easier to manage.
• Paper and layout settings: Select supported paper sizes, media types, and paper sources to match the material loaded in the printer.
• USB or network setup: Configure printing through a direct USB connection or the printer’s wired Ethernet connection, depending on your workspace.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. Choose a package explicitly listed as compatible with your operating system; driver availability and installation methods may differ between versions.

1. Download the appropriate driver. Select the Brother MFC 9460CDN Printer package for your setup. A print driver handles printing, while scanning and other multifunction features may require additional Brother software or a full software package.

1. Prepare the connection. Turn on the printer and check that it is ready. For Ethernet installation, connect it to the same local network as your computer. For USB setup, follow the installer’s instructions on when to connect the cable.

1. Run the installer. Open the downloaded file, allow any required Windows permission prompt, and follow the setup instructions. Select the correct connection type and choose your printer when it appears. Restart the computer if prompted.

1. Test and adjust your settings. Open the Windows printer settings, confirm that the Brother device is listed, and print a test page. Review paper size, color mode, and duplex preferences before sending your regular print jobs.

If the printer is not detected, check the USB cable or network connection before repeating setup. For shared office networks, make sure your computer can reach the printer and that you have permission to install drivers.

Common Issues and Fixes

• Install fails or stops midway: Disconnect the USB cable until the installer prompts, close Brother status/ControlCenter utilities, temporarily disable antivirus, and run the installer as administrator. Remove any older Brother MFC 9460CDN package before upgrading.
• Printer not detected: Confirm the MFC 9460CDN is powered on and ready. For USB, use a rear port and a known-good cable. For network, print a configuration page, verify the current IP address, and create/select the correct TCP/IP port.
• Driver/version conflicts: Uninstall previous Brother and generic PCL/PS drivers via Apps & Features, restart Windows, then install the latest full Brother driver package. Avoid mixing separate printer and scanner drivers unless the package requires it.