Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 3 - 1C14 Driver

The Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 3 – 1C14 driver helps Windows identify and configure this Intel chipset’s PCI Express connection point. It is relevant if you are reinstalling Windows, resolving an unidentified chipset device in Device Manager, or restoring your computer’s original chipset configuration. Although listed under Storage, this component is a PCI Express root port rather than a dedicated storage controller.

Key Features

• Accurate device identification: Intel chipset INF information helps Windows display the correct root port name and associate it with the appropriate system components.
• PCI Express configuration: Supports Windows in recognizing the chipset connection used by downstream PCIe devices; individual connected devices may require separate drivers.
• Chipset setup support: Useful after a clean Windows installation or when chipset entries appear as unknown devices.
• Compatibility-aware installation: Packages may cover Windows 10, 8.1, 7, Vista, and XP, but compatibility depends on the specific release, system model, and Windows architecture.

How to Install Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 3 – 1C14 Driver

1. Check the device identity. Open Device Manager, locate the root port or unidentified device, and inspect Properties > Details > Hardware Ids. Look for Intel vendor ID `VEN_8086` and device ID `DEV_1C14`.
2. Choose a compatible package. Before selecting an Intel(R) 6 Series/C200 Series Chipset Family PCI Express Root Port 3 – 1C14 driver download for Windows, confirm your operating system and whether it is 32-bit or 64-bit. Prefer a package validated by your computer or motherboard manufacturer.
3. Download and prepare. Obtain the free download from a trusted source and extract it if necessary. Choose the latest version that explicitly supports your hardware and operating system, rather than assuming the newest package is suitable.
4. Install the package. Run the supplied chipset installer and follow its instructions. If the download contains only INF files, use Device Manager > Update driver > Browse my computer for drivers and select the extracted folder.
5. Restart and verify. Restart if prompted, then check Device Manager for the correct device name and any remaining warning icons.

Keep the driver configuration updated when a compatible release addresses a specific issue or your manufacturer recommends an update. For Windows 10/11 systems, check support separately: Windows 10 compatibility does not establish Windows 11 support for this older chipset. A chipset INF update may improve identification without replacing Windows’ underlying PCI bus driver.