Intel(R) 5 Series/3400 Series Chipset Family USB Universal Host Controller - 3B3B Driver

The Intel(R) 5 Series/3400 Series Chipset Family USB Universal Host Controller – 3B3B driver helps Windows recognize and configure this Intel chipset’s USB controller so compatible USB peripherals can communicate with your PC. It is relevant to older desktops and laptops showing an unknown controller, a missing driver, or USB detection problems after reinstalling Windows. Although listed under Storage, this device is a USB host controller rather than a dedicated disk controller.

Key Features

• USB controller identification: Helps Windows identify the 3B3B controller correctly in Device Manager when the appropriate chipset information is installed.
• Peripheral connectivity: Works with Windows USB components to support compatible low- and full-speed devices, such as keyboards and mice.
• Chipset configuration: Provides the device information or supporting components required by the selected package; some Intel chipset packages contain identification files rather than a replacement USB driver.
• Legacy Windows options: Packages may be available for Windows 10, 8.1, 7, Vista, and XP. Match the download to your system manufacturer, Windows release, and 32-bit or 64-bit architecture.

How to Install Intel(R) 5 Series/3400 Series Chipset Family USB Universal Host Controller – 3B3B Driver

1. Confirm the hardware. Open Device Manager and locate the controller under Universal Serial Bus controllers or Other devices. Check Properties > Details > Hardware Ids and compare the identifier with the package documentation.
2. Check compatibility. Before choosing an Intel(R) 5 Series/3400 Series Chipset Family USB Universal Host Controller – 3B3B driver download for Windows, verify the supported operating systems. For Windows 10/11 systems, do not assume a Windows 10 package supports Windows 11; this listing does not establish Windows 11 compatibility.
3. Select a trusted package. Look for a free download from your PC manufacturer or Intel’s official support resources. Choose the latest version explicitly compatible with your hardware, not simply the newest chipset package.
4. Install the driver. Create a restore point where available, extract the downloaded archive, and follow its installation instructions. If the package provides compatible INF files for manual installation, use Device Manager’s Update driver option and browse to the extracted folder.
5. Restart and verify. Restart if prompted, then check Device Manager for warning icons and test your USB peripherals.

Keep the driver updated when a compatible update addresses a specific issue or your manufacturer recommends it. If USB devices already work reliably, avoid forcing an unrelated package; Windows may already supply the appropriate USB driver.