The Brother HL L2340D Series Printer driver lets Windows communicate with your printer and send documents with the correct print settings. Install the appropriate Brother driver to access printing preferences and help resolve issues such as an unrecognized printer or jobs that fail to print.

Key Features

• Windows printing support: Provides the software connection needed to use the Brother HL L2340D Series Printer with a compatible Windows 11, 10, 8, or 7 system.
• Document layout controls: Gives you access to settings such as paper size, orientation, and copy count so you can prepare documents for the intended output.
• Print quality preferences: Allows you to adjust available quality and toner-saving options to suit everyday text documents or more detailed pages.
• Printer-specific settings: Makes supported features, such as two-sided printing and paper handling options, available through Windows printing preferences. Available controls may vary by driver version.

How to Install

1. Check your Windows version. Open your system information and confirm which version of Windows you use. Also check whether your system requires a 32-bit or 64-bit driver.
2. Choose the matching driver. Download a Brother driver package that explicitly lists the HL L2340D Series Printer and your operating system. Do not assume a package intended for another Windows version will work correctly.
3. Prepare the printer. Load paper, check that the printer is ready, and close any applications that might send print jobs. If you are installing over USB, follow the installer’s instructions about when to connect the cable.
4. Run the installation. Open the downloaded package, approve the Windows permission prompt if shown, and follow the setup instructions. Select your printer when prompted and allow installation to finish.
5. Verify printing. Find the printer in Windows printer settings and print a test page. Review the paper size and other preferences before sending your first document.

If Windows still shows the printer as unavailable, check the connection and make sure your applications are using the newly installed Brother printer entry rather than an older or duplicate entry.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, remove any existing HL-L2340D driver from Settings > Apps and Printers & scanners, restart Windows, then run the Brother installer as administrator. Temporarily disable third-party antivirus if it blocks setup.
• Printer not detected: Connect the HL-L2340D directly to a USB port, not a hub. Power-cycle the printer, try another cable/port, and confirm it appears under Printers & scanners. For network models, verify same network and IP.
• Driver version conflicts: Delete duplicate HL-L2340D queues and old Brother software, restart the Print Spooler service, then install the latest full driver package from Brother. Do not mix Windows generic and Brother drivers.