The Brother DCP 7055 Printer driver helps Windows communicate with your multifunction device so you can print documents and access supported scanning functions. Installing the appropriate Brother software also gives you access to device-specific settings instead of relying only on basic printing options.

Key Features

• Reliable document printing: Enables Windows applications to send print jobs to the Brother DCP 7055, with settings for paper size, orientation, and copy count.
• Print quality controls: Provides access to supported resolution and toner-saving options, helping you balance text clarity with everyday toner use.
• Scanning support: A package that includes the scanner driver allows compatible applications to receive scans from the device’s flatbed scanner.
• Device-specific configuration: Helps Windows recognize the correct printer model and makes its supported printing options available through printer preferences.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type where applicable. Choose a Brother DCP 7055 driver package explicitly listed as compatible with your version; older packages may not support every Windows release.

1. Download the appropriate package. Select a printer driver for printing alone, or a full software package if you also need scanning tools. Review the package description to confirm which components are included.

1. Prepare the printer and computer. Turn on the device and close any open applications. For a USB installation, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, allow it to make changes if Windows prompts you, and follow the setup instructions. Connect the printer directly to an available USB port when requested, then let installation finish.

1. Verify printing and scanning. Find the Brother DCP 7055 in your Windows printer settings and print a test page. If you installed scanning components, try a scan from a compatible application as well. Restart the computer if the installer requests it.

If the device is not detected, check the USB connection and confirm that the selected package matches your operating system. Avoid assuming that a driver for an older Windows version will work on Windows 11; check the vendor’s compatibility guidance first.

Common Issues and Fixes

• Install fails or hangs: Run the Brother full driver package as administrator, disconnect the USB cable until setup prompts, and temporarily disable antivirus during installation.
• Printer not detected: Connect the DCP-7055 directly to a rear USB port with a known-good cable, avoid hubs, power the printer on before setup, and check Device Manager for an unknown USB device.
• Driver or scanner conflicts: Remove old Brother DCP-7055 printer and scanner entries plus previous MFL-Pro/scan drivers using Brother’s uninstall tool, reboot, then install the latest package and select the correct USB port.