KODAK i920 Scanner Driver

The KODAK i920 Scanner driver helps Windows communicate with your Kodak scanner so compatible scanning software can detect and use it. If you are setting up the scanner, reconnecting it after a Windows reinstall, or troubleshooting a detection problem, installing the appropriate driver is an important first step.

Choose your KODAK i920 Scanner driver download for Windows based on your operating system and whether it uses a 32-bit or 64-bit architecture. Supported systems listed for this device are Windows 10, 8.1, 7, Vista, and XP; check the individual package details before downloading. For Windows 10/11 users, note that Windows 11 is not included in that list, so compatibility should not be assumed.

Key Features

• Device communication: Provides the software connection Windows needs to recognize and work with the KODAK i920 Scanner.
• Scanning application access: Allows compatible software to communicate with the scanner and request scans.
• Scan configuration: Helps compatible applications access the scanning settings supported by the device and driver.
• Setup and maintenance: Supports initial installation and driver replacement when resolving software-related connection issues.

How to Install KODAK i920 Scanner Driver

1. Check your Windows version. Confirm your operating system and system type before selecting a package. A driver intended for a different Windows version or architecture may not install correctly.
2. Select the correct download. Look for the latest version explicitly compatible with the KODAK i920 and your system. When choosing a free download, use a trusted source and verify that the package identifies the correct model.
3. Prepare the scanner. Close scanning applications and read any included setup instructions. If the installer requires the scanner to remain disconnected during setup, leave it unplugged until prompted.
4. Run the installer. Extract the downloaded archive if necessary, launch the setup program, and follow its instructions. Approve administrator access if requested.
5. Connect and test. Connect and power on the scanner when instructed, restart Windows if prompted, and try a scan using a compatible application. If detection fails, check the cable connection and review Device Manager for errors.

Keep your driver updated by checking periodically for a compatible release, especially after operating system changes or recurring scanning problems. Before you update, review the package notes and keep a copy of your working installer so you can restore your previous setup if needed.

Common Issues and Fixes

• Install fails or rolls back: Disconnect the i920 USB cable, close scanning apps, run the installer as administrator, and temporarily disable antivirus. Reboot before reconnecting the scanner.
• Device not detected: Power on the i920 first, try a direct rear USB port and known-good cable, avoid hubs. Check Device Manager for unknown devices; restart Windows Image Acquisition (WIA) and reinstall the scanner driver.
• Version conflicts (TWAIN/WIA/ISIS): Remove older Kodak scanner drivers and Smart Touch/Capture software before installing the new package. Keep only one driver suite, then rescan in Device Manager or reinstall the correct 64-bit driver.