The Barcode Scanner driver helps Windows recognize the device and communicate with it so scanned data can reach compatible software. Before downloading, confirm that the package from the manufacturer matches your scanner’s exact model and your version of Windows 11, 10, 8, or 7. Although this download is listed in the Printer category, use the scanner’s model number—not the category alone—to identify the correct driver.

Key Features

• Device recognition: Provides the model-specific components Windows may need to identify and connect to the Barcode Scanner.
• Application communication: Supports the connection used to pass scanned barcode data to compatible inventory, retail, or document-processing software.
• Connection-mode support: Depending on the model and package, enables operation through a supported USB interface or virtual serial port.
• Configuration compatibility: May allow the manufacturer’s supported utilities to access scanner settings, where these tools are available.

How to Install

1. Identify your scanner and system. Find the model number on the device label, then check your Windows version and system type in Settings or Control Panel. Select a package explicitly intended for that model and operating system.

1. Check whether a separate driver is required. Some barcode scanners work as standard USB keyboards using built-in Windows drivers. A manufacturer-supplied driver may instead be needed for a virtual COM port or another specialized operating mode.

1. Download and prepare the correct package. Use a trusted source and review any included installation instructions. If the download is compressed, extract its contents before proceeding.

1. Install and connect as instructed. Run the installer and approve the Windows permission prompt if required. Connect the scanner when prompted; if the package has no installer, follow the manufacturer’s instructions for installing it through Device Manager.

1. Verify scanning. Restart Windows if requested, check Device Manager for warnings, and scan a known barcode into an appropriate application. For keyboard-mode scanners, a text editor can provide a quick test; serial-mode devices usually require the correct COM port settings in the receiving software.

If scanning fails after installation, check the USB connection, scanner operating mode, and application settings before reinstalling. A driver cannot add barcode formats or capabilities that the scanner’s hardware does not support.

Common Issues and Fixes

• Driver install fails or rolls back: Run the manufacturer’s installer as administrator, disconnect the scanner first, remove any previous scanner software, reboot, then reinstall the correct 32/64-bit driver.
• Scanner not detected: Try a different USB port directly on the PC, avoid unpowered hubs, check the cable, and confirm the scanner is in the right USB HID/keyboard-wedge or virtual COM mode. Check Device Manager for unknown devices.
• Version or mode conflicts: Uninstall old driver entries in Device Manager, remove duplicate scanner utilities, and install the driver version that matches your scanner model and connection mode. Do not mix HID and COM emulation drivers for the same device.