MP460 Driver

The Canon MP460 driver connects your PIXMA MP460 all-in-one printer to Windows, allowing compatible software to access its printing and scanning functions. If you are setting up the device, reconnecting it after a Windows reinstall, or troubleshooting detection problems, choose a driver package that matches your operating system. Despite sometimes appearing in camera categories, the MP460 is a multifunction printer, not a camera.

Key Features

• Printer communication: Enables Windows and supported applications to send print jobs to the MP460 over USB.
• Print settings: Provides access to options such as paper size, media type, and print quality, depending on the installed package.
• Scanning support: Compatible scanner drivers allow scanning applications to communicate with the device; scanning software may require a separate installation.
• Device recognition: Helps Windows identify the connected printer correctly rather than leaving it listed as an unknown device.

How to Install MP460 Driver

1. Check your Windows version. Download listings may cover Windows 10, 8.1, 7, Vista, and XP. Confirm that the individual package explicitly supports your Windows edition and, where applicable, its 32-bit or 64-bit architecture.
2. Select the correct package. Before starting your MP460 driver download for Windows, review its compatibility notes and choose the latest version available for your specific system. For Windows 10/11, do not assume an older driver is supported; Windows 11 is not included in the listed operating systems.
3. Download from a trusted source. Prefer Canon’s official support resources when available. A free download should not require purchasing a third-party driver updater.
4. Run the installer. Close open applications, launch the downloaded setup file, and approve administrator access if prompted. Follow the instructions and connect the USB cable when requested.
5. Test the device. Restart Windows if instructed, then print a test page. If you need scanning, verify that the appropriate scanner driver and compatible scanning application are also installed.

Keep your driver updated by checking for a compatible update when printing or scanning issues arise, or after changing Windows versions. Review release notes before you install a replacement, and avoid replacing a working driver with an unsupported package simply because it is newer.

Common Issues and Fixes

• Install fails or stalls: Run the Canon MP460 setup as administrator, disconnect the USB cable until the installer prompts for it, and temporarily disable third-party antivirus. Remove any partial Canon MP460 installation before retrying.
• Device not detected: Connect the MP460 directly to a rear USB 2.0 port, not a hub. Power on the printer, check the cable, and confirm both the printer and scanner drivers appear in Device Manager. Reinstall the MP460 package if the scanner is missing.
• Driver/version conflicts: Uninstall older Canon MP or PIXMA drivers and scanner software first, restart Windows, then install the MP460 driver matched to your Windows version. Avoid mixing drivers from similar Canon models.