The Belkin F1U201 2×1 USB Peripheral Switch lets two computers take turns using one USB peripheral, such as a printer or scanner. Its driver and switching software help Windows recognize and manage the switch when used with a compatible package. Before downloading, check the package notes for support for your version of Windows 11, 10, 8, or 7.

Key Features

• Shared USB access: Supports a setup in which two connected computers use a single USB peripheral, reducing the need to move its cable between machines.
• Software-assisted switching: Compatible Belkin switching software can help you select which computer has access to the attached device.
• Windows device integration: Provides the software components required by supported configurations to communicate with the F1U201.
• Peripheral flexibility: Works alongside the attached peripheral’s own driver; a printer, scanner, or other USB device may still need separate software.

How to Install

1. Confirm the model and compatibility. Check that the label identifies your switch as the Belkin F1U201. Review the download’s supported Windows versions and system requirements. Do not assume that a legacy package supports Windows 11 or 10 simply because it supports an earlier release.

1. Download and prepare the package. Save the compatible driver or switching utility to your computer. Extract the files if they are compressed, and read any included installation instructions before connecting the hardware.

1. Run the installer. Open the setup program and approve the Windows administrator prompt if requested. Follow the installation prompts, connecting the switch at the stage specified by the instructions.

1. Connect your equipment. Attach both computers and the shared USB peripheral to the appropriate ports. Install compatible switch software on the second computer if required, along with the peripheral’s own driver on each computer.

1. Test switching and device operation. Restart if prompted, select one computer, and test the attached peripheral. Repeat from the other computer after the first has finished using it. If setup fails, check cable connections and package compatibility before reinstalling.

Common Issues and Fixes

• Install fails or driver won’t load: Run the Belkin installer as administrator and use the package matching your Windows version. If using an older unsigned driver, enable compatibility mode or temporarily disable driver signature enforcement. Do not install generic USB switch utilities alongside it.
• Device not detected: Confirm the peripheral is plugged into the F1U201’s shared port and that the correct PC is selected via the switch button/software. Test the peripheral directly on the PC, try a known-good USB cable, and avoid unpowered hubs or USB 3.0 ports if the switch behaves erratically.
• Version conflicts: Uninstall previous Belkin/USB switch software, remove hidden USB devices in Device Manager, reboot, then install the current driver before reconnecting the F1U201. Keep only one peripheral-sharing utility installed.