Xerox WorkCentre 5335 Driver

The Xerox WorkCentre 5335 driver helps Windows communicate with your Xerox multifunction printer over a network, allowing you to send print jobs and configure available printing options. It is useful for office users setting up the device for the first time, reconnecting after a Windows upgrade, or troubleshooting printing problems.

Key Features

• Network printing support: Connect to a Xerox WorkCentre 5335 on your local network and send documents from your Windows computer.
• Print settings control: Adjust paper size, orientation, copy count, and duplex printing where supported by the selected driver and device configuration.
• Device option recognition: Configure installed paper trays and optional finishing accessories so the print dialog reflects your printer’s capabilities.
• Windows compatibility options: Choose a package listed for Windows 11, 10, 8, or 7, checking the individual download’s supported systems and architecture before installing.

How to Install Xerox WorkCentre 5335 Driver

1. Check your Windows version and system type. Before starting your Xerox WorkCentre 5335 driver download for Windows, confirm whether your computer needs a 32-bit or 64-bit package. For Windows 10/11, verify that the selected release explicitly supports your system.
2. Select the correct package. Look for the latest version compatible with both your operating system and the WorkCentre 5335. Use a trusted free download from Xerox’s official support resources, and review any installation notes.
3. Confirm the network connection. Turn on the printer and make sure your computer can reach it on the network. Have the printer’s IP address ready if automatic discovery does not find it.
4. Install the driver. Run the downloaded installer and follow its prompts. If the package requires manual setup, use Windows’ printer settings to add the device by IP address and select the extracted driver files when prompted.
5. Verify the setup. Print a test page, check the default paper settings, and confirm that installed trays or finishing options are configured correctly. A print driver alone may not provide scanning features; those can require separate software.

Keep your driver updated to benefit from available fixes and compatibility improvements. Before you update a working installation, review the release notes and confirm support for your Windows version. If printing problems appear after an update, check the printer’s network address and port settings before reinstalling.

Common Issues and Fixes

• Install fails or stalls: Uninstall existing Xerox print drivers first, restart Windows, then run the WorkCentre 5335 installer as administrator. Temporarily disable antivirus if it blocks the setup files.
• Device not detected: Confirm the WorkCentre 5335 is powered on and connected. For network use, verify the printer IP and that the PC is on the same subnet; for USB, try a direct rear-port connection and a known-good cable.
• Driver version conflicts: Remove old Xerox or generic Windows drivers from Print Management, then install the correct Xerox package for your OS and 32/64-bit architecture. Avoid mixing PCL and PostScript drivers on the same queue.