Hauppauge WinTV HVR 2255 Driver

The Hauppauge WinTV HVR 2255 driver gives your PCIe dual TV tuner the software bridge it needs to work properly with Windows 11, Windows 10, Windows 8, and Windows 7. Once installed, the driver lets your system recognize both tuners and route live television and recorded content to supported media applications without freezing or audio-video sync problems.

Key Features

• Enables both internal tuners on the WinTV HVR 2255 so you can watch one channel while recording another when using compatible software.
• Provides stable support for digital ATSC, clear QAM, and analog NTSC broadcasts, depending on the signal source connected to the card.
• Supports remote control input and IR receiver functionality for changing channels and adjusting volume from a distance.
• Restores correct device identification in Device Manager and allows clean sleep and wake behavior for the tuner.

How to Install

1. Download the Hauppauge WinTV HVR 2255 driver package for Windows 11, Windows 10, Windows 8, or Windows 7 from this page.
2. If the downloaded file is compressed, right-click it and choose Extract All to create a folder with the driver files.
3. Open the extracted folder and launch the setup file as an administrator. If no setup file exists, use Device Manager to update the driver by pointing to the extracted folder.
4. Follow the installation prompts and restart your computer when asked, even if Windows does not require it immediately.
5. After restarting, open your TV application or the WinTV software, scan for channels, and verify that both tuners are detected and working.

Common Issues and Fixes

• Installer fails or rolls back: Uninstall any previous WinTV/Hauppauge packages first, run the HVR-2255 setup as administrator, and temporarily disable antivirus. Reboot before retrying.
• Device not detected: Reseat the PCIe tuner card, confirm it appears in Device Manager, and install the Hauppauge driver before the WinTV app. Check that the slot and BIOS recognize the card.
• Driver/version conflicts: Remove old WinTV software and hidden tuner devices in Device Manager, reboot, then install only the HVR-2255 package matching your Windows version and architecture. Avoid mixing generic tuner drivers with Hauppauge drivers.