The Edirol UM 880 is a USB MIDI interface that connects multiple MIDI instruments and controllers to a Windows computer. Its driver enables communication between the interface and compatible music software, allowing MIDI notes, timing messages, and control data to move between your hardware and applications. When choosing a download for Windows 11, 10, 8, or 7, check the package’s compatibility notes, as this legacy device may require a driver intended for a specific Windows version.

Key Features

• Multiport MIDI connectivity: Provides software access to the UM 880’s eight MIDI inputs and eight MIDI outputs, helping you manage several connected instruments.
• MIDI recording and playback: Lets compatible sequencers and digital audio workstations send and receive MIDI performance data through the interface.
• Separate port selection: Makes individual MIDI connections available in supported applications so you can assign different instruments to different tracks.
• Hardware-to-software communication: Supports the exchange of MIDI messages between your computer and connected equipment. The UM 880 handles MIDI data, not audio recording or playback.

How to Install

1. Check your Windows configuration. Confirm whether you are using Windows 11, 10, 8, or 7, and whether your system is 32-bit or 64-bit. Verify that the download explicitly supports your configuration; a legacy driver is not automatically compatible with newer Windows releases.
2. Download and extract the driver. Save the Edirol driver package to your computer. If it is compressed, extract its contents and read any included installation instructions.
3. Prepare the interface. Close music applications and keep the UM 880 disconnected from USB unless the package instructions say otherwise. Remove an older driver only if the instructions require it.
4. Run the installer. Follow the setup prompts, connect and power on the interface when instructed, and restart Windows if requested. If Windows blocks installation, check for a compatible release rather than disabling security protections.
5. Confirm MIDI operation. Check Device Manager for device errors, then open your music software and enable the required UM 880 MIDI ports. Test a connected keyboard or sound module to verify that MIDI messages are passing correctly.

Common Issues and Fixes

• Install fails or rolls back: Disconnect the UM-880, close DAWs and MIDI utilities, then run the Edirol driver installer as Administrator before reconnecting. Use the correct 64-bit UM-880 package; older unsigned installers may be blocked by Windows.
• Device not detected: Connect directly to a rear USB port, avoid unpowered hubs, and check Device Manager for unknown/USB MIDI devices. Power-cycle the UM-880 after driver installation and confirm it is in USB mode.
• Version conflicts: Remove older Edirol/Roland USB-MIDI drivers and duplicate UM-880 entries in Device Manager, reboot, then install one driver version. In your DAW, reselect the UM-880 MIDI ports after updating.