M Audio Fast Track C400 Driver

The M Audio Fast Track C400 driver connects your M-Audio USB audio interface to Windows so recording software can access its audio inputs and outputs. Installing the appropriate driver helps the interface handle microphone and instrument recording, playback, and monitoring reliably.

Key Features

• Audio input and output access: Makes the C400’s recording and playback channels available to compatible audio applications.
• ASIO support: Allows compatible music-production software to use a dedicated audio driver for responsive recording and monitoring.
• Driver configuration: Provides access to supported settings, such as sample rate and buffer size, so you can balance latency against system stability.
• USB communication: Helps Windows recognize and communicate with the interface rather than relying solely on generic audio support.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7. Check the package’s compatibility notes and system requirements; older driver releases may not officially support newer Windows versions.
2. Prepare the interface and computer. Close your recording software and other audio applications. Disconnect the Fast Track C400 unless the installer’s instructions say otherwise.
3. Run the installer. Extract the download if necessary, open the setup program, and approve the Windows permission prompt. Follow the on-screen instructions to install the driver and any included configuration tools.
4. Connect and restart. Attach the interface to a USB port when prompted, then restart Windows if requested. Wait for device setup to finish before opening your audio software.
5. Configure and test your audio. Select the M Audio Fast Track C400 in your recording application’s audio settings, choosing its ASIO driver where available. Enable the required inputs and outputs, then test playback and a short recording.

If you hear clicks or dropouts, try increasing the audio buffer size. If Windows does not detect the interface, check its power and USB connections before reinstalling the driver.