Lexmark E460dn Driver

The Lexmark E460dn driver enables Windows to communicate with your printer and send documents with the correct print settings. For network use, it helps connect your PC to the E460dn over your local network and provides access to options such as two-sided printing and paper selection. Choose a package that explicitly supports your version of Windows 11, 10, 8, or 7 before installing.

Key Features

• Network printing support: Set up the Lexmark E460dn as a network printer so your computer can send jobs through its Ethernet connection.
• Two-sided printing controls: Access automatic duplex settings for everyday documents, helping reduce paper use when printing longer files.
• Paper and tray settings: Select suitable paper sizes, media types, and available trays to match the document and the printer’s configuration.
• Print output preferences: Adjust supported quality and layout settings for text-heavy reports, forms, and other office documents. Available controls can vary by driver package.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system architecture. Download a Lexmark E460dn-compatible driver package that matches both; do not assume every package supports all four versions.

1. Prepare the network connection. Turn on the printer and connect it to your router or network switch with an Ethernet cable. Make sure your computer can access the same network. If needed, find the printer’s IP address through its network settings or a printed network setup page.

1. Run the installer. Extract the downloaded files if necessary, then launch the setup program. Approve the Windows permission prompt and follow the instructions, selecting a network connection when prompted.

1. Select or add the printer. Choose the E460dn from the detected devices. If it does not appear, use the installer’s IP address option if available, or add the printer through Windows printer settings using its TCP/IP address and the downloaded driver.

1. Confirm settings and test. Open the printer’s preferences, check paper size and duplex options, and print a test page. If printing fails, verify the IP address, network access, and selected printer port before reinstalling.