Intel C600 C220 Series Chipset SATA RAID Controller Driver

The Intel C600 C220 Series Chipset SATA RAID Controller driver lets Windows communicate with the Intel SATA RAID controller, helping the system recognize and access drives connected through it. It is intended for compatible desktops, workstations, and servers that use this controller in RAID mode, particularly after reinstalling Windows or when Device Manager reports a missing storage driver.

Key Features

• Storage controller recognition: Identifies the compatible Intel chipset SATA RAID controller so Windows can communicate with attached storage devices.
• RAID storage access: Provides the driver support needed to access supported RAID arrays configured through the system’s firmware or storage utilities.
• Platform-specific compatibility: Driver packages may support Windows 11, 10, 8, or 7, depending on the release and hardware platform. Confirm support for your exact system before downloading.
• Maintenance and fixes: A compatible update may address documented storage issues or improve reliability. The latest version is not always the right choice for older controllers.

How to Install Intel C600 C220 Series Chipset SATA RAID Controller Driver

1. Identify your controller and Windows version. Open Device Manager and check under Storage controllers or IDE ATA/ATAPI controllers. Compare the controller’s hardware IDs with the package’s supported devices, and confirm your Windows edition and system architecture.
2. Choose a matching package. Before starting an Intel C600 C220 Series Chipset SATA RAID Controller driver download for Windows, verify the supported operating systems and platform requirements. For Windows 10/11, do not assume a package designed for Windows 7 or 8 is compatible. Choose a free download from Intel or your system manufacturer when available.
3. Prepare safely. Back up important files and review the installation instructions. Do not switch the BIOS storage mode between AHCI and RAID just to match a driver; doing so can prevent Windows from starting.
4. Install the driver. Run the supplied installer if included. For a driver-only package, extract the files, select the controller in Device Manager, choose Update driver, and browse to the extracted folder. During Windows setup, use Load driver if the installer cannot detect the RAID storage.
5. Restart and verify. Reboot if prompted, then check Device Manager for warnings and confirm that expected drives and RAID volumes are accessible.

Keep the driver updated when a compatible release addresses a relevant issue or is recommended by your system manufacturer. Review release notes before you update, and prioritize verified compatibility over simply installing the newest package.

Common Issues and Fixes

• Install fails or driver is rejected: Confirm the OS/architecture and use the Intel RSTe enterprise package for C600/C220, not consumer Intel RST. During Windows setup, use Load driver and point to the extracted RAID driver.
• RAID controller or drives not detected: Check BIOS/UEFI SATA mode is set to RAID, not AHCI/IDE. Initialize or import any foreign RAID volume in the Intel Option ROM/BIOS, then rescan in Device Manager or reload setup.
• Version conflicts/Windows uses wrong driver: Uninstall older RST/RSTe packages, avoid mixing OEM and Intel packages, and install a matching RSTe branch. Verify the driver version under Storage controllers in Device Manager.