HP LaserJet P2055dn Driver

The HP LaserJet P2055dn driver lets Windows communicate with your HP monochrome laser printer, helping applications send documents correctly and access available printing options. It is useful when setting up this network-ready printer, connecting another computer to it, or troubleshooting problems after a Windows upgrade.

Key Features

• Network printing support: Connect to the HP LaserJet P2055dn over your local Ethernet network so compatible computers can use the shared printer.
• Print settings access: Adjust paper size, orientation, copy count, and print quality through the driver’s preferences.
• Automatic duplex options: Access two-sided printing when the installed driver recognizes the printer’s duplex capability and it is enabled.
• Windows configuration: Set up printing on Windows 11, 10, 8, or 7 with a compatible package. Driver availability and installation methods may differ between Windows versions.

How to Install HP LaserJet P2055dn Driver

1. Check your Windows version and system type. Before choosing an HP LaserJet P2055dn driver download for Windows, confirm whether your computer requires a 32-bit or 64-bit package. For Windows 10/11, check the package’s compatibility information rather than assuming an older installer will work.

1. Select a suitable driver. Look for the latest version that explicitly supports your operating system and printer model. If a model-specific package is unavailable, check whether an HP Universal Print Driver supports your setup. Use a trusted source for a free download, and avoid installers that bundle unrelated software.

1. Prepare the printer connection. Turn on the printer and connect it to your network with an Ethernet cable. Make sure your computer can reach the same network. A printer configuration page can help you find its IP address.

1. Install the driver. Open the downloaded installer and follow its prompts. Choose a network connection when offered. If the printer is not discovered automatically, use Windows printer settings to add it by IP address and select the compatible driver.

1. Confirm the setup. Print a test page, review paper preferences, and check that two-sided printing is available. If printing fails, verify the printer’s IP address and selected port before reinstalling.

Keep the driver updated when a compatible release addresses printing issues or changes in Windows. Before you update, review the supported systems and installation notes; the newest package is not always the right choice for an older operating system.

Common Issues and Fixes

• Install fails or hangs: Remove old HP LaserJet queues and driver packages via Print Management, restart the Print Spooler, then run the installer as administrator. If the full HP installer still fails, use the HP Universal Print Driver (PCL6) or basic PCL5 driver for the P2055dn.
• Device not detected: For USB, use a rear USB 2.0 port and a known-good cable, power-cycle the printer, and restart the spooler. For Ethernet, confirm the P2055dn’s IP address, ping it, and add a Standard TCP/IP port manually instead of relying on auto-discovery.
• Version conflicts/duplicate queues: Delete existing P2055/P2055dn queues and driver packages, reboot, and install only one driver package. Avoid mixing the full HP solution with the Universal Print Driver, and verify the queue uses the correct USB or TCP/IP port.