The Fuji Xerox ApeosPort IV C3370 driver connects this multifunction printer to your Windows PC, allowing applications to send print jobs with the correct settings. For Windows 11, 10, 8, or 7, choose a driver package that matches your operating system and system architecture, and check its compatibility notes before installing.

Key Features

• Access to print settings: Adjust paper size, orientation, copy count, and print quality from the driver’s printing preferences.
• Color and monochrome options: Select color output for graphics and presentations or black-and-white printing for everyday documents.
• Two-sided printing controls: Configure duplex printing to reduce paper use when supported by the selected driver and printer setup.
• Paper handling and finishing settings: Select available paper trays and configure installed accessories so the print options reflect your device’s actual hardware.

How to Install

1. Check your Windows version. Open your PC’s system information to confirm whether you use Windows 11, 10, 8, or 7 and whether the system is 32-bit or 64-bit. Match those details to the driver’s listed requirements.

1. Download and prepare the driver. Select a package intended for the Fuji Xerox ApeosPort IV C3370. If the download is compressed, extract it to a folder you can easily locate. A print driver may not include scanning utilities, so check the package contents if you also need scanning.

1. Prepare the connection. Turn on the printer and make sure it is ready. For network installation, connect your PC to a network that can reach the printer and note the printer’s IP address if automatic discovery does not find it. For a USB setup, follow the installer’s instructions on when to connect the cable.

1. Install the printer software. Run the setup program and follow the prompts to select the device and connection type. If no installer is provided, use Windows’ Add printer option and browse to the extracted driver files when prompted.

1. Verify the configuration. Open the printer’s properties, confirm any installed trays or finishing accessories, and print a test page. If the output is incorrect, check the selected driver, paper settings, and connection before sending further jobs.

Common Issues and Fixes

• Install fails or rolls back: Run the Fuji Xerox installer as administrator, stop the Print Spooler service, remove old ApeosPort IV C3370 queues/drivers in Print Management, reboot, then reinstall the correct 32/64-bit Windows package.
• Device not detected: For USB, try a direct rear-port connection and known-good cable. For network, assign the printer a static IP, then add it via Add Printer > TCP/IP using port 9100 or LPR.
• Version conflicts/duplicate queues: Uninstall existing Fuji Xerox ApeosPort IV C3370 drivers and stale queues, restart the spooler, and install the latest driver matching your Windows version. Avoid mixing PCL/PS drivers unless required.