The Epson L5290 driver allows Windows to communicate with your printer so you can send documents, adjust print settings, and use supported printing features. Installing the appropriate Epson software can also enable scanning, making it easier to handle everyday paperwork from your computer.

Key Features

• Print settings control: Choose paper size, media type, orientation, and print quality to suit documents, forms, or images.
• Connection support: Set up printing through USB or a supported network connection, depending on how your Epson L5290 is connected.
• Scanning support: With the compatible scanner driver and Epson scanning utility installed, scan documents to your PC and adjust options such as resolution and output format.
• Printer maintenance access: Compatible Epson software provides tools for tasks such as nozzle checks and print head cleaning to help troubleshoot print-quality issues.

How to Install

1. Check your Windows version. Identify whether your computer runs Windows 11, 10, 8, or 7. Also check whether it uses a 32-bit or 64-bit system, then select a driver package that explicitly supports your configuration.

1. Download the required software. Choose the printer driver for the Epson L5290. If you need scanning, download the compatible scanner driver or a combined software package that includes it.

1. Prepare the connection. Turn on the printer and complete its initial setup if necessary. For network installation, make sure the printer and computer are connected to the same local network. For USB setup, follow the installer’s instructions about when to connect the cable.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if shown, and follow the setup instructions. Select your connection method and choose the correct printer when it appears.

1. Verify the setup. Restart your computer if prompted, then print a test page from Windows printer settings. If you installed scanning software, try a sample scan as well.

If installation fails or the printer is not detected, confirm that the package matches your Windows version and check the USB cable or network connection before trying again.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, run the Epson L5290 installer as administrator, remove any partial Epson entries from Apps & Features and Printer properties > Drivers, reboot, then reinstall the full L5290 package.
• Device not detected: For USB, use a direct rear port and a known-good cable. For Wi-Fi, confirm the L5290 is on the same 2.4 GHz network, add it by IP/TCP-IP port, and install Epson Scan 2 for scanning.
• Driver/version conflicts: Uninstall older Epson L-series or Windows generic drivers, delete the printer queue, and install the latest L5290 driver for your Windows version—avoid mixing Windows Update and Epson packages.