The Eltron P310 driver connects your card printer to Windows, allowing compatible applications to send print jobs using the correct device settings. Installing the appropriate driver helps Windows recognize the printer and gives you access to the printing options available for your model.

Key Features

• Printer communication: Enables Windows applications to send card designs, text, and graphics to the Eltron P310.
• Card layout controls: Provides access to supported preferences, such as card dimensions and orientation, so your output matches the layout created in your software.
• Print configuration: Lets you adjust the options exposed by the driver to suit your installed supplies and printing requirements.
• Windows integration: Makes the printer available through standard Windows printing menus, helping you select and manage it alongside other installed devices.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check whether it uses a 32-bit or 64-bit system. Before downloading, verify that the package explicitly supports your operating system and the Eltron P310; older printer drivers may not support newer Windows releases.

1. Download and prepare the package. Save the matching driver to your computer. If it comes in a compressed folder, extract the contents before starting installation.

1. Run the installer. Open the setup program and approve the administrator prompt if requested. Follow its instructions about when to connect and power on the printer.

1. Add the printer if necessary. If the package has no installer, use Windows printer settings to add a printer manually. Select the appropriate connection or port, then use “Have Disk” to locate the supplied driver information file.

1. Confirm the setup. Open the printer’s preferences, review the available card and print settings, and print a sample using suitable supplies. If installation fails, check the connection and package compatibility rather than forcing an unsupported driver.

Common Issues and Fixes

• Install fails or driver is blocked: The P310 is a legacy Eltron label printer, so Windows 10/11 may reject older unsigned drivers. Run the installer as administrator in compatibility mode for Windows XP/7, or use a signed Zebra/Eltron-certified package if available.
• Device not detected: Verify the P310 is powered on and connected to the correct LPT/COM port. For USB-to-parallel or USB-to-serial adapters, select the adapter’s assigned port under Printer Properties > Ports. Test with a known-good cable and avoid USB hubs.
• Version conflicts or incorrect labels: Remove existing Eltron/Zebra label-printer drivers and queues before installing. Match the driver to the P310’s emulation, set the correct label size/media, then restart the print spooler.