The Dell B1165nfw Mono MFP driver connects this multifunction printer to your Windows PC, allowing applications to send print jobs with the correct settings. Installing the appropriate Dell software can also make scanning available when the package includes scanner drivers and utilities.

Key Features

• Reliable print communication: Helps Windows recognize the printer and send documents correctly, whether you are printing everyday correspondence, reports, or forms.
• Document output controls: Provides access to supported settings such as paper size, orientation, copy count, and print quality.
• Connection setup: Supports configuration for the connection methods available on the printer, including USB and network printing, when supported by the selected driver package.
• Scanning support: A package containing scanner components enables compatible applications to communicate with the MFP’s scanner. A print-only driver does not provide scanning functionality.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type. Select a driver package that explicitly supports your operating system and architecture; older packages may not list Windows 11 compatibility.

1. Download the appropriate package. Choose the Dell B1165nfw Mono MFP print driver for basic printing, or a fuller software package if you also need scanning tools. Review the package description to confirm which components are included.

1. Prepare the printer. Power it on and load paper. For network installation, connect the printer and computer to the same local network. If using USB, follow the installer’s instructions about when to attach the cable.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt if requested, and follow the setup instructions. Select the connection type, choose your printer when it appears, and finish installing the required components.

1. Verify operation. Open Windows printer settings and print a test page. If scanner software was installed, try a simple scan as well. Restart the computer if prompted, and check the cable or network connection if the device is not detected.

Common Issues and Fixes

• Install fails or stops midway: Run the Dell installer as administrator, disconnect the USB cable until prompted, and remove any previous Dell/Samsung print driver before retrying.
• Device not detected: Check that the B1165nfw is powered on and connected to a working USB port, or confirm the correct Wi-Fi/network IP address. For network use, print a configuration page and ping the printer’s IP before reinstalling.
• Driver/version conflicts: Uninstall old printer and scanner entries via Programs and Features and Print Management, restart Windows, then install the correct 32-bit/64-bit Dell package. Avoid mixing older Dell drivers with the current B1165nfw driver.