The Dell 2135cn MFP PCL6 driver lets Windows communicate with your Dell multifunction printer and send print jobs using the PCL6 printing language. Installing the appropriate driver helps you access printer settings and avoid problems caused by a missing or incorrectly matched driver.

Key Features

• PCL6 printing support: Provides the interface needed to send documents, spreadsheets, and other print jobs to the Dell 2135cn MFP using PCL6.
• Print layout controls: Gives you access to options such as paper size, orientation, copy count, and page layout, depending on the driver package.
• Color and output settings: Lets you adjust available color and print-quality preferences to suit everyday office documents or more detailed presentations.
• Printer configuration: Helps Windows recognize the printer’s capabilities and available paper sources so you can choose settings that match your device.

How to Install

1. Check your Windows version. Identify whether your computer runs Windows 11, 10, 8, or 7, and check its system architecture. Choose a Dell 2135cn MFP PCL6 driver package that explicitly supports your operating system; older packages may not support every Windows version.
2. Prepare the printer. Turn on the device and decide whether you will use a USB or network connection. For network printing, confirm that the computer can reach the printer. If using USB, follow the installer’s instructions on when to connect the cable.
3. Download and extract the driver. Save the matching package to your computer. If it is compressed, extract its contents before starting installation.
4. Run the installer or add the printer manually. Follow the setup prompts and select the correct connection type. If the package has no installer, open Windows printer settings, choose the option to add a printer, and use “Have Disk” when prompted to select the extracted driver file.
5. Confirm setup with a test page. Open the printer’s properties and print a test page. Check the selected port, paper size, and output preferences if the result is incorrect or the job does not print.

This PCL6 driver is intended for printing. Scanning and other multifunction features may require separate Dell software, so check the package details if you need more than print support.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable until the Dell 2135cn installer prompts for it. Remove any existing Dell 2135cn PCL6 queues in Print Management, reboot, then run the Dell package as administrator. Avoid using a generic Windows PCL6 driver for MFP scanning features.
• Device not detected: For USB, connect directly to the PC and avoid hubs. For network, confirm the MFP’s IP address and create a Standard TCP/IP port. Ensure both print and scan drivers are installed.
• Version conflicts/duplicate queues: Uninstall old Dell 2135cn PCL5/PCL6 drivers, delete stale queues and ports, reboot, then install one current Dell PCL6 package. Set the new queue as default.