The Dell 1135n driver enables Windows to communicate with your Dell multifunction laser printer, allowing applications to send print jobs and access available printer settings. Choosing a driver package that matches your operating system helps you set up the device correctly and troubleshoot problems such as an unrecognized printer or jobs stuck in the queue.

Key Features

• Printer communication: Provides the software connection needed to send documents from Windows applications to the Dell 1135n.
• Print settings: Gives you access to options such as paper size, orientation, copy count, and print quality, depending on the driver package.
• Connection setup: Helps configure printing through USB or a local network, according to how the printer is connected.
• Multifunction support: A full software package may include scanning components or utilities. A print-only driver does not necessarily enable every device function.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. Verify that the selected download explicitly supports your configuration; older driver packages may not list newer Windows versions.
2. Prepare the printer. Turn on the Dell 1135n and make sure it is ready. For network installation, connect it to the same local network as your computer. For USB installation, follow the installer’s instructions about when to attach the cable.
3. Download and extract the package. Save the appropriate Dell driver to your computer. If it comes in a compressed archive, extract its contents before starting setup.
4. Run the installation. Open the setup program, approve the Windows permission prompt if requested, and select the correct connection method. If no installer is included, use Windows printer settings to add the device and select the extracted driver when prompted.
5. Verify operation. Restart the computer if instructed, then print a test page. If you also need scanning, check whether the package includes a scanner driver and install that component separately if required.

If installation fails, confirm the driver’s compatibility rather than assuming that a package intended for Windows 7 or 8 will work on Windows 10 or 11. For a network connection, also check that the printer is reachable and that Windows is using the correct printer port.

Common Issues and Fixes

• Install fails or stalls: Disconnect USB, remove any partial Dell 1135n entry in Printers & scanners, run the driver setup as administrator, and reconnect USB only when prompted. On Windows 11/10, use the Dell 1135n package rather than generic WSD.
• Device not detected: Check the USB cable/port and confirm the printer is on. For network use, assign a static IP and add the printer by TCP/IP port, not hostname. Restart Print Spooler.
• Version/port conflicts: Uninstall old Dell 1135n drivers and scan-to-PC software, restart, then install one package matching your Windows version/architecture. Remove duplicate printer queues and set the correct USB or TCP/IP port.