The D-Link AirPlus Xtreme G DWL-G132 Wireless USB Adapter (rev.A) connects a compatible PC to a Wi-Fi network through a USB port. Its driver allows Windows to recognize the adapter and communicate with its wireless hardware, making it essential when setting up the device or restoring a missing network connection.

Key Features

• Device recognition: Helps Windows identify the DWL-G132 revision A adapter correctly instead of displaying it as an unknown USB or network device.
• Wireless networking: Enables the adapter’s supported Wi-Fi functions so you can find nearby networks and connect to a compatible access point.
• Network configuration: Works with compatible Windows networking tools or supplied D-Link software to manage connection settings.
• Hardware-specific communication: Provides the software interface required by revision A hardware. Matching the driver to the adapter’s revision helps avoid installation errors.

How to Install

1. Confirm your hardware revision. Check the label on the adapter for “DWL-G132” and “rev.A.” Drivers intended for another revision or a similarly named D-Link adapter may not work.
2. Check the driver’s compatibility. Before downloading, verify that the package supports your Windows version and system architecture. For Windows 11, 10, 8, or 7, do not assume that a legacy driver supports every listed system; this older adapter may have limited compatibility with newer Windows releases.
3. Download and extract the files. Save the matching driver package locally. If the computer has no internet connection, use another device to download it and transfer the files with a USB drive.
4. Install the driver. Run the included installer and follow its instructions, connecting the adapter when prompted. If no installer is supplied, open Device Manager, locate the adapter, select Update driver, and browse to the extracted driver folder.
5. Restart and test the connection. Restart if requested, then check that the adapter appears under Network adapters in Device Manager. Connect to a compatible Wi-Fi network and test internet access.

If Windows rejects the driver or reports a compatibility problem, check for a supported package rather than disabling driver-signature protection.

Common Issues and Fixes

• Install fails or rolls back: Run the DWL-G132 rev.A setup as Administrator. On newer Windows, use Compatibility Mode for XP/Vista and temporarily disable driver signature enforcement if the older installer is blocked. Keep Windows Update from replacing the driver until setup finishes.
• Adapter not detected: Plug it directly into a rear USB 2.0 port, not a hub. In Device Manager, remove unknown/broken USB or network entries, rescan, then reinstall with the adapter unplugged and connect it only when prompted.
• Version conflicts or dropouts: Uninstall previous D-Link/Atheros wireless drivers and utilities, reboot, and install only the package matching rev.A. Remove duplicate adapters in Device Manager and use either the D-Link utility or Windows wireless management, not both.