The Corsair Link TM USB Dongle driver helps Windows recognize the dongle and communicate with compatible Corsair Link hardware. If the device appears as unknown in Device Manager or is not detected by Corsair Link software, installing the appropriate driver may restore that connection. Despite sometimes appearing under a Printer category, this device is associated with Corsair Link hardware communication rather than printing.

Key Features

• USB device recognition: Provides the driver support Windows needs to identify the Corsair Link TM USB Dongle correctly.
• Corsair Link communication: Enables compatible Corsair Link software to exchange information with hardware connected through the dongle.
• Hardware status access: Supports the connection used by Corsair Link software to display available device information; monitoring and control options depend on the attached hardware.
• Connection troubleshooting: Installing or reinstalling the correct package can help resolve detection problems caused by missing or incorrectly installed drivers.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, Windows 10, Windows 8, or Windows 7, and check whether it uses a 32-bit or 64-bit system. Verify that the driver package explicitly supports your configuration, especially when using older Corsair Link hardware on newer Windows releases.
2. Download a matching package. Choose a trusted Corsair driver or Corsair Link software package that lists support for the dongle. Avoid selecting a generic printer driver based on the category label.
3. Prepare the installation. Close Corsair Link software and extract the download if it is compressed. Follow any included instructions about whether to connect or disconnect the dongle before setup.
4. Install the driver. Run the supplied installer and follow its prompts. If the package contains driver files without an installer, open Device Manager, locate the dongle or unidentified USB device, select Update driver, and browse to the extracted folder.
5. Confirm detection. Restart Windows if requested, then check Device Manager for warning icons. Open compatible Corsair Link software to verify that the connected hardware is recognized.

If detection still fails, try another suitable USB connection and confirm that the downloaded package matches the device. A successful driver installation alone does not guarantee that every Corsair Link software version supports every Windows release.

Common Issues and Fixes

• Installer fails or hangs: Run the Corsair Link/iCUE installer as administrator, temporarily disable antivirus, and remove any previous Corsair Link installation before retrying.
• Dongle not detected: Try a different internal USB header or rear USB port, reseat the dongle, and check Device Manager for unknown/USB devices. Reinstall the driver after rebooting.
• Version conflicts: Uninstall all Corsair Link and iCUE versions, reboot, then install only the version that supports your Corsair Link device. Avoid running older Corsair Link software alongside iCUE.